Table 9. Miscellaneous parts (continued)
FRU descriptions
Camera subparts kit
*
• Camera mylar
• Microphone rubber
*
Available on some models
Connector and cable guide
This topic provides information to help Lenovo authorized service technicians identify connectors and cables
for replacement purpose. To view each FRU and the exploded illustration of the computer, see "Major
FRUs" on page 47 and "LCD FRUs" on page 50.
Note: Depending on your computer model, some connectors or cables might not be available.
System board connectors and cables
Table 10. System board connector and cable guide
Item
Connector (location)
1
Coin-cell battery connector
(internal)
2
Power button card connector
(internal)
3
LED connector (internal)
4
Wireless-LAN card or WiGig
module slot (internal)
5
Wireless-WAN card slot (internal,
with or without the M.2 solid-state
drive installed)
6
Removable battery connector
(internal)
52
T570 and P51s Hardware Maintenance Manual
Internal cable required
Coin-cell battery cable
Power button card cable
LED cable
No
No
No
Self-service CRU
Optional-service
CRU
No
No
Cable connection
The coin-cell battery comes with
cable. Connect the cable to this
connector.
Connect one end to the power
button card and the other end to
this connector.
Connect one end to the
camera/microphone card and
the other end to this connector.
Insert the wireless-LAN/WiGig card
into this slot.
Insert the wireless-WAN card into
this slot.
Connect the removable battery
directly to this connector.