Lenovo IdeaPad Z400 Touch Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. IdeaPad Z400 Touch
  6. Hardware maintenance manual

Lenovo IdeaPad Z400 Touch Hardware Maintenance Manual

Z/p series
Hide thumbs Also See for IdeaPad Z400 Touch:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Lenovo Z/P Series
Hardware
Maintenance
Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo IdeaPad Z400 Touch

Summary of Contents for Lenovo IdeaPad Z400 Touch

  • Page 1 Lenovo Z/P Series Hardware Maintenance Manual...
  • Page 2 “Notices” on page 116. • This manual applies to the following models: Lenovo Z400/Z500/Z400 Touch/ Z500 Touch/P400 Touch/ P500. The illustrations used in this manual are for Lenovo Z500 unless otherwise stated. Second Edition(Jan. 2013) © Copyright Lenovo 2013. All rights reserved.

  • Page 3: Table Of Contents

    Power-on password ..........24 Supervisor password ........24 Power management ........25 Screen blank mode ...........25 Sleep (standby) mode ........25 Lenovo Z/P Series ........26 Specifications ..........26 Status indicators ........... 28 Function key combinations ......30 FRU replacement notices ......31 Screw notices ..........31...

  • Page 4: About This Manual

    The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under...

  • Page 5: Safety Information

    Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service an Lenovo Z/P Series computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 •...

  • Page 6: General Safety

    Z/P Series Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2.

  • Page 7: Electrical Safety

    Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents.
  • Page 8 Z/P Series Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.

  • Page 9: Safety Inspection Guide

    4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

  • Page 10: Handling Devices That Are Sensitive To Electrostatic Discharge

    Z/P Series Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.

  • Page 11: Safety Notices: Multilingual Translations

    Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer.
  • Page 12 Z/P Series Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short- circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing.
  • Page 13 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
  • Page 14 Z/P Series Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
  • Page 15 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à...
  • Page 16 Z/P Series Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
  • Page 17 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.

  • Page 18: Laser Compliance Statement

    Z/P Series Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S.
  • Page 19 Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.

  • Page 20: Important Service Information

    To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://consumersupport.lenovo.com/. 2. Enter a serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.

  • Page 21: Strategy For Replacing A Hard Disk Drive

    Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. •...

  • Page 22: Important Information About Replacing Rohs Compliant Frus

    FRU part numbers. Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs.

  • Page 23: General Checkout

    General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer.

  • Page 24: What To Do First

    Z/P Series Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2.

  • Page 25: Power System Checkout

    Replace the system board. • If the problem continues, go to “Lenovo Z/P Series” on page 26. Note: Noise from the AC adapter does not always indicate a defect. Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer.
  • Page 26 Z/P Series Hardware Maintenance Manual Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack.

  • Page 27: Related Service Information

    System.In order to save application files and the initial backed up files of the system, the hard disk in a Lenovo computer includes a hidden partition when it is shipped. If you need to restore the system to the point of your first boot up, just enter Lenovo OneKey Recovery System and run System Recovery.

  • Page 28: Passwords

    The recovery process might take up to 2 hours. Passwords As many as two passwords may be needed for any Lenovo computer: the power-on password (POP) and the supervisor password (SVP). If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on.

  • Page 29: Power Management

    Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. Screen blank mode If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off.

  • Page 30: Lenovo Z/P Series

    • “FRU replacement notices” on page 31 • “Removing and replacing an FRU” on page 32 • “Locations” on page 85 • “Parts list” on page 88 Specifications The following table lists the specifications of the Lenovo Z/P Series : Table 1. Specifications Feature Description Processor •...
  • Page 31 Lenovo Z/P Series Table 1. Specifications (continued) Feature Description I/O port • Combo audio jack × 1 • RJ45 × 1 • HDMI port × 1 • USB 2.0 port × 2, USB 3.0 port × 1 • 2 in 1 slot × 1 (SD/MMC) Audio •...

  • Page 32: Status Indicators

    Z/P Series Hardware Maintenance Manual Status indicators The system status indicators below show the computer status: Z400...
  • Page 33 Lenovo Z/P Series Z500/P500 Table 2. Status indicators Indicator Charge Indicator Meaning status Status On (solid white) The computer is powered on. Power The computer is in sleep mode and is Blinking connected to the AC power adapter. The computer is powered off.

  • Page 34: Function Key Combinations

    Z/P Series Hardware Maintenance Manual Function key combinations The following table shows the function of each combination of function key. Table 3. Fn key combinations Key combination Description Fn + PgUp: Enables/disables the scroll lock. Fn + PgDn: Activates the system request. Fn + Home: Activates the pause function.

  • Page 35: Fru Replacement Notices

    This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: •...

  • Page 36: Removing And Replacing An Fru

    Z/P Series Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified.

  • Page 37: 1010 Keyboard

    Lenovo Z/P Series 1010 Keyboard Figure 1. Removal steps of keyboard Remove the two screws Z400 Z500/P500 Step Screw (quantity) Color Torque M2 × 12 mm, flat-head, nylok-coated (2) (Z400) Black 1.85+/-0.15 kgf*cm M2 × 12 mm, flat-head, nylok-coated (2) (Z500/ Black 3.62 kg-cm...
  • Page 38 Z/P Series Hardware Maintenance Manual Figure 1. Removal steps of keyboard (continued) Insert the screwdriver into one of the screw hole on the bottom . Then pull the keyboard out of the keyboard bezel Z400 Z500/P500...
  • Page 39 Lenovo Z/P Series Figure 1. Removal steps of keyboard (continued) Lift the keyboard a little, and then detach the connectors in the direction shown by arrows . Remove the keyboard in the direction shown by arrow Z400 Z500/P500 When installing: Make sure that the FPC connector is attached firmly.

  • Page 40: 1020 Optical Drive

    Z/P Series Hardware Maintenance Manual 1020 Optical drive For access, remove this FRU: • “1010 Keyboard” on page 33 Figure 2. Removal steps of optical drive Remove the screw Z400...
  • Page 41 Lenovo Z/P Series Figure 2. Removal steps of Optical drive (continued) Z500/P500 Step Screw (quantity) Color Torque M2.5 × 6 mm, flat-head, nylok-coated (1) (Z400) Black 3.0+/-0.3 kgf*cm M2.5 × 6 mm, flat-head, nylok-coated (1) (Z500/ Black 8.03 kg-cm P500)
  • Page 42 Z/P Series Hardware Maintenance Manual Figure 2. Removal steps of Optical drive (continued) Insert a screwdriver into the screw hole and push the optical drive in the direction shown by arrow . Pull the optical drive out in the direction shown by arrow Z400 Z500/P500...

  • Page 43: 1030 Base Cover

    Lenovo Z/P Series 1030 Base cover For access, remove this FRU: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 Figure 3. Removal steps of base cover Z400 Remove the four screws Step Screw (quantity) Color Torque M2.5 ×...
  • Page 44 Z/P Series Hardware Maintenance Manual Figure 3. Removal steps of base cover (continued) Remove the two rubber feet . Remove a total of eight screws (two , three and three ) from the bottom. Step Screw (quantity) Color Torque M2.5 × 6 mm, flat-head, nylok-coated (2) Black 3.0+/-0.3 kgf*cm M2 ×...
  • Page 45 Lenovo Z/P Series Figure 3. Removal steps of base cover (continued) Z500/P500 Remove the five screws Step Screw (quantity) Color Torque M2.5 × 6 mm, flat-head, nylok-coated (5) Black 8.03 kg-cm...
  • Page 46 Z/P Series Hardware Maintenance Manual Figure 3. Removal steps of base cover (continued) Open the four rubber feet . Remove a total of ten screws (four , three and three ) from the bottom. Step Screw (quantity) Color Torque M2.5 × 6 mm, flat-head, nylok-coated (4) Black 8.03 kg-cm M2 ×...
  • Page 47 Lenovo Z/P Series Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following label: The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.

  • Page 48: 1040 Battery Pack

    Z/P Series Hardware Maintenance Manual 1040 Battery pack For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode.
  • Page 49 Lenovo Z/P Series Figure 4. Removal steps of battery pack (continued) Remove the battery pack in the direction shown by arrow Z400 Z500/P500 When installing: Make sure the battery pack connector is attached firmly.

  • Page 50: 1050 Hard Disk Drive

    Z/P Series Hardware Maintenance Manual 1050 Hard disk drive For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 Attention: • Do not drop the hard disk drive or apply any physical shock to it.
  • Page 51 Lenovo Z/P Series Figure 5. Removal steps of hard disk drive (continued) Detach the HDD connector in the direction shown by arrow . Remove the hard disk drive from the slot in the direction shown by arrow Z400 Z500/P500 When installing: Make sure that the HDD connector is attached firmly.

  • Page 52: 1060 Pci Express Mini Card For Wireless Lan

    Z/P Series Hardware Maintenance Manual 1060 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 •...
  • Page 53 Lenovo Z/P Series Figure 6. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow Z400 Z500/P500 When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd) (AUX) into jack labeled 2 on the card.

  • Page 54: 1070 Dimm

    Z/P Series Hardware Maintenance Manual 1070 DIMM For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 Figure 7.
  • Page 55 Lenovo Z/P Series Figure 7. Removal steps of DIMM (continued) Z500/P500 When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly...

  • Page 56: 1080 Fan Assembly And Heat Sink Assembly

    Z/P Series Hardware Maintenance Manual 1080 Fan assembly and Heat Sink assembly For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 Figure 8.
  • Page 57 Lenovo Z/P Series Figure 8. Removal steps of fan assembly and heat sink assembly (continued) Z500/P500 Step Screw (quantity) Color Torque M2 × 3.2, flat-head, nylok-coated (3) Black 3.62 kg-cm M2 × 2.5, flat-head, nylok-coated (2) Black 3.62 kg-cm M2.5 × 6, flat-head, nylok-coated (1) Black 8.03 kg-cm...
  • Page 58 Z/P Series Hardware Maintenance Manual Figure 8. Removal steps of fan assembly and heat sink assembly (continued) Lift the fan assembly and heat sink assembly in the direction shown by arrow Be careful not to damage the connector. Z400 Z500/P500 Attention: Do not handle the heat sink assembly roughly.
  • Page 59 Lenovo Z/P Series Figure 8. Removal steps of fan assembly and heat sink assembly (continued) Z400 Z500/P500 When installing: Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, to the part shown in the figure above. Either too much or too less grease application can cause a thermal problem due to imperfect contact with a component.

  • Page 60: 1090 Cpu

    Z/P Series Hardware Maintenance Manual 1090 CPU For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...
  • Page 61 Lenovo Z/P Series Figure 9. Removal steps of CPU (continued) Z500/P500 When installing: Place the CPU on the CPU socket in the direction shown by arrow , and then rotate the head of the screw in the direction shown by arrow...

  • Page 62: 1100 Odd Board And Led Board (Z500/P500)

    Z/P Series Hardware Maintenance Manual 1100 ODD board and LED board (Z500/P500) For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...
  • Page 63 Lenovo Z/P Series Figure 10. Removal steps of ODD board and LED board (continued) Remove the two boards in the direction shown by arrows When installing: Make sure that the two FPC connectors are attached firmly.

  • Page 64: 1110 Speakers

    Z/P Series Hardware Maintenance Manual 1110 Speakers For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...
  • Page 65 Lenovo Z/P Series Figure 11. Removal steps of speakers (continued) Z500/P500 Step Screw (quantity) Color Torque M2 × 5.7, flat-head, nylok-coated (4) Black 8.03 kg-cm...
  • Page 66 Z/P Series Hardware Maintenance Manual Figure 11. Removal steps of speakers (continued) Remove the speakers Z400 Z500/P500 When installing: Make sure that the speakers connector is attached firmly.

  • Page 67: 1120 System Board

    Lenovo Z/P Series 1120 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
  • Page 68 Z/P Series Hardware Maintenance Manual Figure 12. Removal steps of system board (continued) Z500/P500 Detach the power connector and LCD connector in the direction shown by arrows . Remove a total of six screws (four , one and one ) from the bottom.
  • Page 69 Lenovo Z/P Series Figure 12. Removal steps of system board (continued) Z500/P500 When installing: Make sure that the power connector is attached firmly. Step Screw (quantity) Color Torque M2.5 × 3 mm, flat-head, nylok-coated (4) Black 3.0+/-0.3 kgf*cm (Z400) M2.5 × 3 mm, flat-head, nylok-coated (4) Black 8.03 kg-cm...
  • Page 70 Z/P Series Hardware Maintenance Manual Figure 12. Removal steps of system board (continued) Remove the RJ-45 door in the direction shown by arrow . Remove the system board in the direction shown by arrow Z400 Z500/P500...

  • Page 71: 1130 Keyboard Bezel

    Lenovo Z/P Series 1130 Keyboard bezel For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...
  • Page 72 Z/P Series Hardware Maintenance Manual Figure 13. Removal steps of keyboard bezel (continued) Z500/P500 Remove a total of three screws (two and one Step Screw (quantity) Color Torque M2.5 × 3 mm, flat-head, nylok-coated (2) Black 8.03 kg-cm M2.5 × 6 mm, flat-head, nylok-coated (1) Black 8.03 kg-cm Remove the power board, USB board and DC-in jack in the direction shown by...

  • Page 73: 1140 Lcd Unit

    Lenovo Z/P Series 1140 LCD unit For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...
  • Page 74 Z/P Series Hardware Maintenance Manual Figure 14. Removal steps of LCD unit Z500/P500 Remove the five screws Step Screw (quantity) Color Torque M2.5 × 6 mm, flat-head, nylok-coated (5) Black 8.03 kg-cm M2 × 2 mm, flat-head, nylok-coated (1) (Z400) Black 1.85+/-0.15 kgf*cm ’...
  • Page 75 Lenovo Z/P Series Figure 14. Removal steps of LCD unit (continued) Release the LCD cable from the cable guides in the direction shown by arrows . Then lift the LCD hinge in the direction shown by arrow Z400 Z500/P500 When installing: •...
  • Page 76 Z/P Series Hardware Maintenance Manual Figure 14. Removal steps of LCD unit (continued) Remove the keyboard bezel from the LCD unit in the direction shown by arrows Z400 Z500/P500...

  • Page 77: 1150 Lcd Front Bezel

    Lenovo Z/P Series 1150 LCD front bezel For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...
  • Page 78 Z/P Series Hardware Maintenance Manual Figure 15. Removal steps of LCD front bezel Z500/P500...

  • Page 79: 1160 Lcd Panel And Hinges

    Lenovo Z/P Series 1160 LCD panel and hinges For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...
  • Page 80 Z/P Series Hardware Maintenance Manual Figure 16. Removal steps of LCD panel and hinges Z500/P500 Step Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylok-coated (4) (Z400) Black 1.85+/-0.15 kgf*cm M2 × 2.5 mm, flat-head, nylok-coated (4) Black 3.62 kg-cm (Z500/P500) Lift the LCD panel a little .
  • Page 81 Lenovo Z/P Series Figure 16. Removal steps of LCD panel and hinges (continued) Z500/P500 When installing: Make sure that the metal connector is attached firmly. Remove the LCD panel Z400...
  • Page 82 Z/P Series Hardware Maintenance Manual Figure 16. Removal steps of LCD panel and hinges (continued) Z500/P500 Z400 Remove a total of eight screws (two and six ). Then release the two hinges in the direction shown by arrows...
  • Page 83 Lenovo Z/P Series Figure 16. Removal steps of LCD panel and hinges (continued) Z500/P500 Remove a total of ten screws (two and eight ). Then release the two hinges in the direction shown by arrows Step Screw (quantity) Color Torque M2 ×...

  • Page 84: 1170 Integrated Camera, Lcd Cable And Antenna Assembly

    Z/P Series Hardware Maintenance Manual 1170 Integrated camera, LCD cable and antenna assembly For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 •...
  • Page 85 Lenovo Z/P Series Figure 17. Removal steps of integrated camera, LCD cable and antenna assembly (continued) Z500/P500 When installing: Stick the integrated camera to the top center of the LCD cover and ajust the placement of it to make sure the connector is attached firmly.
  • Page 86 Z/P Series Hardware Maintenance Manual Figure 17. Removal steps of integrated camera, LCD cable and antenna assembly (continued) Z500/P500 Remove the LCD cable and antenna assembly in the direction shown by arrow Z400...
  • Page 87 Lenovo Z/P Series Figure 17. Removal steps of integrated camera, LCD cable and antenna assembly (continued) Z500/P500...

  • Page 88: 1180 Power Board (Z400)

    Z/P Series Hardware Maintenance Manual 1180 Power board (Z400) For access, remove these FRUs in order: • “1010 Keyboard” on page 33 • “1020 Optical drive” on page 36 • “1030 Base cover” on page 39 • “1040 Battery pack” on page 44 •...

  • Page 89: Locations

    Lenovo Z/P Series Locations Front view and right-side view Integrated camera Built-in microphone Wireless LAN antennas Computer display Power button Touchpad System status indicators Note: For the description of each indicator, see “Status indicators” on page 28. Combo audio jack...
  • Page 90 Z/P Series Hardware Maintenance Manual Z500/P500...

  • Page 91: Bottom And Left-Side View

    Lenovo Z/P Series Bottom and Left-side view Speakers Memory card slot USB port HDMI port RJ-45 port VGA port Fan louvers Novo button AC power adapter jack Z400 Z500/P500...

  • Page 92: Parts List

    Z/P Series Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 89 • “LCD FRUs” on page 97 • “Keyboard” on page 102 • “Miscellaneous parts” on page 111 • “AC adapters” on page 112 •...

  • Page 93: Overall

    Lenovo Z/P Series Overall Z400...
  • Page 94 Z/P Series Hardware Maintenance Manual Z500/P500...
  • Page 95 Lenovo Z/P Series Z400 Table 5. Parts list—Overall (Z400) No. FRU FRU no. CRU ID. See “Miscellaneous parts” on page 111. LCD unit for Z400 (see “LCD FRUs” on page 97.) Touch module for Z400 Touch, GZE LEG-04M-1D 73044074 GFF Na SY Z400 TSP...
  • Page 96 Z/P Series Hardware Maintenance Manual Table 5. Parts list—Overall (continued) No. FRU FRU no. CRU ID. Platform, Chief River platform 35w, Intel I5-3360M 102500297 2.8G L1 3M 2cPGA Platform, Chief River platform 35w, Intel I5-3320M 102500299 2.6G L1 3M 2cPGA Platform, Chief River platform 35w, Intel I5-3210M 102500301 2.5G L1 3M 2cPGA...
  • Page 97 Lenovo Z/P Series No. FRU FRU no. CRU ID. RAM, Nanya, NT4GC64B8HG0NS-DI DDR3 1600 11201042 RAM, Samsung, M471B1G73BH0-CK0 DDR3 1600 11200342 RAM, Hynix, HMT41GS6MFR8C-PB DDR3 1600 11200345 VIWP1 USB Board W/Cable 90002114 WLAN, Intel 2230 BGN+BT M PCIE HMC 20200078...
  • Page 98 Z/P Series Hardware Maintenance Manual Z500/P500 Table 6. Parts list—Overall (Z500/P500) No. FRU FRU no. CRU ID. See “Miscellaneous parts” on page 111. LCD unit for Z500/P500 (see “LCD FRUs” on page 97.) Touch module for P400 Touch, GZE LEG-04M-1D 73044481 GFF Na SY P400 TSP Touch module for P400 Touch, OFO MCF-140-0650...
  • Page 99 Lenovo Z/P Series Table 6. Parts list—Overall (Z500/P500) (continued) No. FRU FRU no. CRU ID. Platform, Huron River 35W, Intel I3-2370M 2.4G J1 3M 102500228 2cPGA processor Platform, Huron River 35W, Intel SNB I3-2350M 2.3G 3M 102500018 J1 PGA processor Platform, Huron River 35W, Intel SNB B950 2.1G 2M...
  • Page 100 Z/P Series Hardware Maintenance Manual Table 6. Parts list—Overall (Z500/P500) (continued) No. FRU FRU no. CRU ID. Wlan, WiFi 2x2 BGN+BT4.0, Intel 2230 BGN+BT M PCIE 20200078 Wlan, WiFi 1x1 BGN, Cbt BCM94313HMG 1x1BGN 20200102 Wlan, WiFi 1x1 BGN, Liteon HB125 1x1BGN HMC 20200223 Wlan, WiFi 1x1 BGN+BT4.0, Cbt BCM943142HM 20200222...

  • Page 101: Lcd Frus

    Lenovo Z/P Series LCD FRUs In Lenovo Z400/Z500/P500, there are following types of LCDs. • “14-in. HD TFT”...
  • Page 102 Z/P Series Hardware Maintenance Manual • “15.6-in. HD TFT”...
  • Page 103 Lenovo Z/P Series 14-in. HD TFT Table 7. Parts list—14-in. HD TFT No. FRU FRU no. CRU ID. VIWP1 LCD Bezel 90202316 VIWP1 LCD Hinge L+R 90202311 Panel, HD, LGD LP140WH2-TLE2 HD G F LED1 NB LCD 18200152 Panel, HD, AUO B140XTN03.0 9A HD G F LED1 NB LCD...
  • Page 104 Z/P Series Hardware Maintenance Manual 15.6-in. HD TFT Table 8. Parts list—15.6-in. HD TFT No. FRU FRU no. CRU ID. VIWZ2 LCD Bezel 90202123 VIWZ2 LCD Bracket L+R 90202136 Panel, HD-AG, AUO B156XTN03.4 HW0A HD AG S 18200763 LED1 NB LCD Panel, HD-AG, CMI N156BGE-LA1 HD AG S LED1 NB 18200764 Panel, HD-AG, BOE HB156WX1-600 HD AG S LED1 NB...
  • Page 105 Lenovo Z/P Series Table 8. Parts list—15.6-in. HD TFT (continued) No. FRU FRU no. CRU ID. Camera, 0.3M(For P500), AWA AM-VS058 0.3M NB 73044060 camera 61dB Camera, 0.3M(For P500), AVC HAA-586605 0.3M NB 73042541 camera VIWZ2 LCD Cable 90202117 VIWZ2 Antenna*2...

  • Page 106: Keyboard

    Z/P Series Hardware Maintenance Manual Keyboard Table 9. Parts list—Keyboard (Z400) Language CRU ID. English 25205849 U.K. English 25205850 Italian 25205851 Spanish 25205852 Turkish 25205853 Thai 25205854 Portuguese 25205855 Latin 25205856 Canadian Bilingual (En+Fr) 25205857 Korean 25205858 Traditional Chinese 25205859 Russian 25205860 French...
  • Page 107 Lenovo Z/P Series Table 9. Parts list—Keyboard (Z400) (continued) Language CRU ID. Arabic 25205893 Brazilian 25205894 Dutch 25205896 Greek 25205897 Hebrew 25205898 Hungarian 25205899 Nordic 25205900 Sunrex Belgian 25205901 (continued) Icelandic 25205902 Slovenian 25205903 Swiss 25205904 US international 25205905 Czech&Slovak...
  • Page 108 Z/P Series Hardware Maintenance Manual Table 9. Parts list—Keyboard (Z400) (continued) Language CRU ID. English 25206029 U.K. English 25206030 Italian 25206031 Spanish 25206032 Turkish 25206033 Thai 25206034 Portuguese 25206035 Latin 25206036 Canadian Bilingual (En+Fr) 25206037 Korean 25206038 Traditional Chinese 25206039 Russian 25206040 French...
  • Page 109 Lenovo Z/P Series Table 9. Parts list—Keyboard (Z400) (continued) Language CRU ID. Japanese 25206105 Dutch 25206106 Greek 25206107 Hebrew 25206108 Hungarian 25206109 Nordic 25206110 Darfon Z400 (win8) Belgian 25206111 (with backlight) (continued) Icelandic 25206112 (continued) Slovenian 25206113 Swiss 25206114 US international 25206115 Czech&Slovak...
  • Page 110 Z/P Series Hardware Maintenance Manual Table 10. Parts list—Keyboard (Z500/P500) Language CRU ID. Arabic 25209261 Belgian 25209262 Brazilian 25209263 Bulgarian 25209264 Canadian Bilingual (En+Fr) 25209265 Czech&Slovak 25209266 Dutch 25209267 French 25209268 German 25209269 Greek 25209270 Hebrew 25209271 Hungarian 25209272 Icelandic 25209273 Indic 25209274...
  • Page 111 Lenovo Z/P Series Table 10. Parts list—Keyboard (Z500/P500) (continued) Language CRU ID. Japanese 25206404 Korean 25206405 Latin 25206406 Nordic 25206407 Portuguese 25206408 Russian 25206409 Slovenian 25206410 Darfon Spanish 25206411 (continued) Swiss 25206412 Traditional Chinese 25206413 Thai 25206414 Turkish 25206415 U.K. English...
  • Page 112 Z/P Series Hardware Maintenance Manual Table 10. Parts list—Keyboard (Z500/P500) (continued) Language CRU ID. Arabic 25206479 Belgian 25206480 Brazilian 25206481 Bulgarian 25206482 Canadian Bilingual (En+Fr) 25206483 Czech&Slovak 25206484 Dutch 25206485 French 25206486 German 25206487 Greek 25206488 Hebrew 25206489 Hungarian 25206490 Icelandic 25206491 Indic...
  • Page 113 Lenovo Z/P Series Table 10. Parts list—Keyboard (Z500/P500) (continued) Language CRU ID. Nordic 25206527 Portuguese 25206528 Russian 25206529 Slovenian 25206530 Spanish 25206531 Swiss 25206532 Sunrex (continued) Traditional Chinese 25206533 Thai 25206534 Turkish 25206535 U.K. English 25206536 English 25206537 US international...
  • Page 114 Z/P Series Hardware Maintenance Manual Table 10. Parts list—Keyboard (Z500/P500) (continued) Language CRU ID. Canadian Bilingual (En+Fr) 25206213 Darfon English 25206237 Canadian Bilingual (En+Fr) 25206243 Darfon (with backlight) English 25206267 Canadian Bilingual (En+Fr) 25206273 Chicony English 25206297 P500 (win8) Canadian Bilingual (En+Fr) 25206303 (with backlight) English...

  • Page 115: Miscellaneous Parts

    Lenovo Z/P Series Miscellaneous parts Z400 Table 11. Parts list—Miscellaneous parts (Z400) CRU ID. System miscellaneous parts: • ( a ) VIWP1 ODD Bracket 90202336 • ( b ) VIWP1 ODD Bezel Brown Rambo 90202328 • ( b ) VIWP1 ODD Bezel Pink Rambo 90202329 •...

  • Page 116: Ac Adapters

    Z/P Series Hardware Maintenance Manual AC adapters Table 13. Parts list—3-pin AC adapters CRU ID. 65W, Delta ADP-65KH BD 20V/3.25A Adapter 36001929 65W, Liteon PA-1650-56LC Adapter 36001651 65W, Brazil PA-1650-52LB Adapter (Brazil) 36001714 65W, Delta ADP-65KH B 20V,3.25A Adapter (Brazil) 36002066 65W, Chicony CPA-A065 20V3.25A Adapter(330PF) 36001943...

  • Page 117: Power Cords

    Lenovo Z/P Series Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 14. Parts list—3-pin power cords Region CRU ID. 145000600 • LINETEK PC323+RVV300/300+LS15 1m Argentina 145000599 •...
  • Page 118 Z/P Series Hardware Maintenance Manual Table 14. Parts list—3-pin power cords (continued) Region CRU ID. Israel 145000563 • Longwell LP-41+H03VV-F+LS-18 1m 145000562 • Longwell LP-30B+SPT-2 18AWG+LS-18 1m 145000561 • Longwell LP-61L+H03VV-F+LS-18 1m Indian 145000560 • Longwell LP-67+BIS+LS-18 1m Italy 145000559 •...
  • Page 119 Lenovo Z/P Series Table 14. Parts list—3-pin power cords (continued) Region CRU ID. Argentina 145000528 • VOLEX VA2073+H03VV-F+VAC5S 1m Brazil 145000527 • VOLEX CH10S3+H03VV-F+VAC5S 1m Israel 145000526 • VOLEX SI16S3+H03VV-F+VAC5S 1m 145000525 • VOLEX M2511+HO3VV-F+VAC5S 1m...

  • Page 120: Notices

    The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

  • Page 121: Trademarks

    Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are either registered trademarks or trademarks of Lenovo in the United States and/or other countries: ® Lenovo ®...

This manual is also suitable for:

Z seriesZ500Z500 touchP400 touchP500

Table of Contents