Table of Contents
Advertisement
7. If use the MW+Convection mode, select the appropriate
temperature by pressing the Up and Down button. At
that time, press the Select button to set temperature.
• If don't set the power level within 5 seconds,
Automatically changes to the cooking time
setting stage. (Default: 180 °C )
8. Select the cooking time by press Up and Down
button until the appropriate cooking time is
displayed.
9. Press the START button.
Result:
Cooking starts.
• When cooking has finished, the oven
will beep and flash "End" four times.
The oven will then beep one time per
minute.
Before using the crusty plate, preheat it by selecting the combination
mode for 3 to 5 minutes:
• Combination of convection (200 °C) and microwaves. (600 W power
level)
• Combination of grill and microwaves. (600 W power level)
Use oven gloves at all times as the crusty plate will become very hot.
Please note that the crusty plate has a teflon layer which is not scratch-
resistant. Do not use any sharp objects like a knife to cut on the crusty
plate.
Use plastic accessories to avoid scratches on the surface of the crusty
plate or remove the food from the plate before cutting.
Do not place any recipients on the crusty plate that are not heat-resistant
(plastic bowls for example).
Never place the crusty plate in the oven without the turntable.
How to clean the Crusty Plate
Clean the crusty plate with warm water and detergent and rinse off with
clean water.
Do not use a scrubbing brush or a hard sponge otherwise the top layer
will be damaged.
Please note
The crusty plate is not dishwasher-safe.
SWITCHING THE BEEPER OFF
You can switch the beeper off whenever you want.
1. Press the START and STOP / ECO button at the same
time. (one second)
Result:
2. To switch the beeper back on, press the START and
STOP / ECO buttons again at the same time. (one
second)
Result:
English - 51
The oven does not beep to indicate the
end of a function.
The oven operates normally.
Advertisement
Table of Contents
