Control Knobs; Changing The Oven Light - CDA RV911SS/1 Installation, Use And Maintenance Manual

Table of Contents

Advertisement

Flexible Gas Pipe
Check the flexible gas pipe connecting the gas supply to the cooker
regularly.
It must be always in perfect condition; in case of damage contact
Customer Care for advice.

Control Knobs

Should any of the control knobs become stiff, do not use force.
Contact Customer Care for advice.

Changing The Oven Light

1. Disconnect the electrical power supply (for example, by switching
off the main isolator switch).
2. Unscrew the light cover.
3. Fit a new bulb.
4. Refit the cover.
Note:
Use only bulbs designed to resist up to 300°C with the following
characteristics: 230 V, type E14 and same power of the
replaced bulb (check watt power as stamped on the bulb itself).
What to do if you smell gas:
1. Open doors and windows
2. Turn the gas supply off
3. Call TRANSCO on 0800 111 999
22

Advertisement

Table of Contents
loading

Table of Contents