OSP Home Furnishings BATON RAUGE HUTCH BTH2937 Assembly Instructions

May, 2021

BTH2937

BATON RAUGE HUTCH

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.officestar.net or call or write us.

Table of Contents

Do you have a question about the BATON RAUGE HUTCH BTH2937 and is the answer not in the manual?

Page 1 May, 2021 BTH2937 BATON RAUGE HUTCH Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
Page 2 Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At its option OSP Home Furnishings will: (a) Supply compatible ®...
Page 3 PARTS (A) Hutch (1 PC) HARDWARE LIST DRAWING DESCRIPTION SIZE QUANTITY Screw 5/16” x 40mm 4 PCS Felt 20mm 2 PCS Anti-tip Kit 1 PC Knob 2 PCS Bolt 4 x 25mm 2 PCS Phillips screwdriver also needed for assembly (not provided)
Page 4 STEP 1 FULLY TIGHTEN ALL SCREWS. STEP 2 FULLY TIGHTEN ALL BOLTS.
Page 5 ANTI-TIP KIT Place product in desired location. Secure one Bracket to wall using Long Screw, FULLY TIGHTEN LONG SCREW USING PHILLIPS SCREWDRIVER (not provided). Secure remaining Bracket to rear of Product using Short Screw, FULLY TIGHTEN SHORT SCREW USING PHILLIPS SCREWDRIVER (not provided). Loop Safety Strap through Brackets and fasten Safety Strap.