OSP Home Furnishings BATON ROUGE BTD2937 Assembly Instructions

Desk

February, 2020

BTD2937

BATON ROUGE DESK

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.officestar.net or call or write us.

Table of Contents

Do you have a question about the BATON ROUGE BTD2937 and is the answer not in the manual?

Page 1 February, 2020 BTD2937 BATON ROUGE DESK Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
Page 2 LIMITED WARRANTY OSP Home Furnishings™ warrants to the original purchaser that this product will be free from defects in material and workmanship as described below. OSP Home Furnishings™ will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase.
Page 3 3. Rename all English discriptions to French discriptions. PARTS (A) Top (1 PC) (B) Left and Right rear legs (2 PCS) (C) Left and Right Front Legs (2 PCS) (D) Rear Support (1 PC) (E) Side Support (2 PCS) HARDWARE LIST DRAWING DESCRIPTION SIZE...
Page 4 STEP 1 (BR) (BL) DO NOT FULLY TIGHTEN BOLTS AND SCREWS. REMOVE DRAWERS. STEP 2 (CL) (CR) TURN TO THE UPRIGHT POSITION, APPLY FIRM PRESSURE TO ALIGN & FULLY TIGHTEN SCREWS USING PHILLIPS SCREWDRIVER (NOT PROVIDED). FULLY TIGHTEN ALL BOLTS USING ALLEN WRENCH (5). INSTALL DRAWERS.