Compuprint 9065plus User Manual page 17

9. Turn the ribbon-winding knob in the arrow direction (located on the cartridge) to take up
slack in the ribbon.
10. Push the cartridge down gently until it clips into place at locking points.
Black cartridge when the ribbon shifter option is
not installed
11. Turn the ribbon-winding knob again in the direction of the arrow to take up slack in the ribbon.
12. To ensure that the ribbon guide runs freely along the ribbon, manually move the print carriage
horizontally.
If the used ribbon cartridge needs to be replaced, see
manual.
Black "Long Life" cartridge when the ribbon
shifter option is installed
"Replacing The Ribbon
12
Cartridge", later in this