Compuprint 9065plus User Manual page 52

Setting the Parallel Interface Parameters
Interface Type
INTERFACE
↑
PARALL INTERFACE
↓
SERIAL INTERFACE
1284 BIDIR. I/F
CX. PARALLEL I/F
Setting the Select-In Signal
1284 BIDIR . I/F
↑
SELECT-IN HOST
SELECT-IN ON
↓
DATA BITS 8
SELECT-IN HOST
SELECT-IN ON
PARALL INTERFACE
↑
→ 1284 BIDIR. I/F
CX. PARALLEL I/F
↓
SELECT-IN HOST
Bidirectional IEEE 1284 parallel interface.
Centronics type parallel interface (mono-directional).
→ or ←
→ or ←
The printer checks the SELECT-IN signal coming from the host.
The SELECT-IN signal of the parallel interface is ignored and treated always
as ON.
→ or ←
→ or ←
47