Troubleshooting - Nilfisk-Advance ALTO ATTIX 140 Operating Instructions Manual

ATTIX 140 - ATTIX 150
Fault
The vacuum cleaner suddenly stops
Dust leaks from the vacuum cleaner
Electrostatic current on the vacuum
cleaner
Liquid leaks from the vacuum cleaner
The vacuum cleaner does not start
after emptying the container
GB
C320

Troubleshooting

Causes
Clogged main filter
Clogged vacuum hose
Circuit breaker activation
The filter is torn
Non existent or inefficient grounding
The level monitoring function does not
work
The level monitoring hose is clogged
10
Remedies
Shake the filter.
Replace it if this is not sufficient.
Check the vacuum hose and clean it.
Check the setting.
Check the motor electrical input.
Empty the container.
Contact an authorized after-sales
service centre if necessary.
Replace it with another of identical
category.
Check all ground connections.
Especially check the inlet.
Lastly, the hose must be strictly
antistatic.
Contact an authorized Service Centre.
Release the container and clean the
level sensor.
11/2008