Connecting Wires To Terminals - Kenwood Z-838W Instruction Manual

Connecting Wires to Terminals

Non-fading left output (White) (Z838W/Z738)
Rear left output (White) (Z738 only)
Non-fading right output (Red) (Z838W/Z738)
Rear right output (Red) (Z738 only)
Rear left output (White)(Z838W only)
Rear right output (Red)(Z838W only)
Connector Function Guide
Pin Numbers for
Cable Color
ISO Connectors
External Power
Connector
A–4 Yellow
A–5 Blue/White
A–6 Orange/White
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2 Purple/Black
B–3 Gray
B–4
Gray/Black
B–5
White
B–6
White/Black
B–7
Green
B–8
Green/Black
Front left output (White)
Front right output (Red)
KENWOOD disc changer input 14
To connect the Disc changer, consult your
Disc changer manual. 15
Functions
Wiring harness
(Accessory1)
Battery
Power Control
Dimmer
Battery wire (Yellow)
Ignition (ACC)
Earth (Ground)
Ignition wire (Red)
Connection
Rear Right (+)
Rear Right (–)
Front Right (+)
A–4 Pin (Yellow)
Front Right (–)
Front Left (+)
Connector A
Front Left (–)
Rear Left (+)
Connector B
Rear Left (–)
Fuse (10A) 13
16
External amplifier control wire
(Pink / Black)
6A
TEL mute wire (Brown)
7A
Power control/ Motor antenna
A–7 Pin (Red) 8
control wire (Blue/White)
9
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
— 45 —
To External Display/
Steering remote 30
FM/AM antenna input
Antenna Conversion Adaptor (ISO–JASO)
(Accessory3) 2
If no connections are made, do
not let the wire come out from
the tab. 18
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
EXT.
control function.
CONT
20
Connect to the terminal that is
grounded when either the
TEL MUTE telephone rings or during
conversation.
Connect either to the power
20
control terminal when using the
optional power amplifier, or to the
P.CONT
antenna control terminal in the
ANT.CONT
vehicle.
3
Antenna Cord (ISO) 1
23
21
To connect the KENWOOD
navigation system, consult
your navigation manual. 22
23