C" And "Display Type D; Display Switching Part For "Display Type - Kenwood Z-838W Instruction Manual

General features
In Standby mode
Character information display part b Display
Information
Blank (Only when Display Type is "Display Type A")
Date
Date & Clock
(Only when Display Type is "Display Type B")
Character information display part c Display
Information
Blank
Date
Date & Clock
The "ALL OFF" is always displayed on the a part display.
Display switching part for "Display Type C" and
"Display Type D"
When Display Type is set to "Display Type C" or "Display Type
D", the displayed contents are changed.
"Display Type C"
Picture part a
Character information display part b
Display
"DATE"
"DATE+CLOCK"
Display
"DATE"
"DATE+CLOCK" or "CLOCK"
— 16 —
"Display Type D"
Picture part a
1
Select the Display Type
Press the [DISP] button.
2
Enter Display Control mode
Press the [S.A] button.
"Display Control" is displayed.
3
Switch character information display part b
Press the [AM] button.
Each time the button is pressed the display switches.
The Reference for the display content is after this operation's
explanation.
Switch the Picture part a
Press the [FM] button.
Each time the button is pressed the display switches.
Display
Demonstration
Movie 1
Movie 2
Downloaded movie (Z838W only)
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4
Spectrum Analyzer 5
Wallpaper
4
Exit Display Control mode
Press the [S.A] button.