Installation; Grounding; Placement; Jackpack Cover - LG 60PX4DR Training Manual

INSTALLATION

GROUNDING

Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding
methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

PLACEMENT

The TV can be installed in various ways such as on a wall, or
on a desktop etc. Some models can be mounted verically
(Portrait) or horizontally (Landscape). Do not mount models
that are not denoted as pivot models veritcally. For proper
ventilation, allow a clearance of 4 in. on each side and the
top, 2.36 in. on the bottom, and 4 in. from the wall.

JACKPACK COVER

Some models feature a jackpack cover. Remove the cover by
grasping the lower left and right of the cover and then pulling it
out.
Make the required connections and then replace the cover by
aligning the guide to the bushings and press the cover in place
with your hand.

ANTI-TIP BRACKETS

If the set will be mounted on a desk top, secure the
TV assembly by joining it to a wall by using the
included wall brackets. Some models are mounted
differently than others, refer to the owners manual
for the model you are installing.
Plasma Training
4 inches
13
INSTALLATION
2 inches
4 inches
4 inches
4 inches
Installation