LG 60PX4DR Training Manual page 16

OPERATION
TIP: The EZ Scan function will re-add previously deleted channels to the "Channel Map". In
order to maintain Channel Map preferences, the manual scan option should be used for
individual channel additions.
MANUAL SCAN
The Manual Scan option allows users to manually add channels to the "Channel Map" without
having to perform a complete scan.
1. Press MENU on the Remote Control or Front Controls
/
2. Use the
/
3. Use the
4. Use the or ENTER buttons to enter the Manual Scan function
/
5. Use the
6. Use the button to move to the channel number field
/
7. Use the
8. Press the ENTER button to save the channel.
9. Press EXIT to completely exit the On-Screen Menu or MENU to return to the previous
menu.
NOTE: Input physical channel numbers instead of virtual channel numbers. (For Example, WXYZ
may broadcast NTSC on Ch 5 and ATSC on Ch 9. Even though the ATSC broadcast appears
as Ch 5-1, 5-2, etc., the physical channel number is Ch 9 while the virtual channel
assignment or "5" is carried in the PSIP data.)
CHANNEL EDIT
The Channel Edit feature allows users to specify channel usage. Users may add or delete channels
from the Channel Map. (The add function primarily operates on channels that have already been
added to the Channel map and previously deleted. Use the Manual Scan function to add a new
channel.) Users may also create a Favorite Channel Map by using the Channel Edit feature and
marking specified channels "FAV".
1. Press MENU on the Remote Control or Front Controls
/
2. Use the
/
3. Use the
4. Use the or ENTER buttons to enter the Channel Edit function
/
5. Use the
6. To Add / Delete a channel, press the ENTER button
7. To mark or remove a channel from the Favorite Channel Map, press the FAV button
8. Press EXIT to completely exit the On-Screen Menu or MENU to return to the previous
menu.
TIP: To switch between channel types, TV, CATV, DTV, CADTV, move to the top of the window
and select the tab that corresponds with the desired channel type.
DTV SIGNAL STRENGTH
The DTV Signal Strength functions displays a bar meter showing the current strength of the incoming
ATSC signal. This feature only applies to digital channel reception and is not available for NTSC
channels. This feature is designed to aid in antenna placement and alignment for ATSC reception.
Plasma Training
buttons to highlight the SETUP Menu (1
buttons to highlight Manual Scan (2
buttons to select the channel type (TV/DTV/CATV/CADTV)
buttons to select the channel number
buttons to highlight the SETUP Menu (1
buttons to highlight Channel Edit (3
/ /
buttons to select a channel number
st
Menu) and press
nd
Item)
st Menu) and press
rd
Item)
16
Operation