LG 60PX4DR Training Manual page 17

1. Press MENU on the Remote Control or Front Controls.
/
2. Use the
/
3. Use the
4. Use the or ENTER buttons to display the DTV Signal Meter.
5. Press EXIT to completely exit the On-Screen Menu or MENU to return to the previous
menu.
TIP: You may also display the DTV Signal Meter by pressing the SIGNAL button on the Remote
Control.
CHANNEL LABEL
The Channel Label feature allows users the ability to assign a network logo to individual channels.
1. Press MENU on the Remote Control or Front Controls.
/
2. Use the
/
3. Use the
4. Use the or ENTER buttons to enter the Channel Label Setup Screen.
5. Use the Channel Up / Down buttons to select the desired channel.
/
6. Use the
7. Press ENTER to assign the logo to the channel.
8. Press EXIT to completely exit the On-Screen Menu or MENU to return to the previous
menu.
NOTE: Not all Network Logos are available. Memory limitations restrict the amount of logos
that can be available within the software of the TV.
MAIN INPUT
The Main Input option selects the TV's input (picture source) to be displayed on the screen.
1. Press MENU on the Remote Control or Front Controls
/
2. Use the
/ buttons to highlight Main Input (6
3. Use the
4. Use the or ENTER buttons to enter the Main Input Selection List
/
5. Use the
6. Press ENTER to confirm input selection
7. Press EXIT to completely exit the On-Screen Menu or MENU to return to the previous
menu.
SUB INPUT
The Sub Input option selects the input (picture source) to be displayed as Picture-In-Picture (PIP).
1. Press MENU on the Remote Control or Front Controls
2. Use the /
3. Use the /
4. Use the or ENTER buttons to enter the Main Input Selection List
5. Use the /
6. Press ENTER to confirm input selection
Plasma Training
buttons to highlight the SETUP Menu (1
buttons to highlight DTV Signal (4
buttons to highlight the SETUP Menu (1
buttons to highlight Channel Label (5
/ /
buttons to select the desired logo.
buttons to highlight the SETUP Menu (1
buttons to highlight the desired input (Antenna, Cable, Video 1, etc)
buttons to highlight the SETUP Menu (1
buttons to highlight Sub Input (7
buttons to highlight the desired input (Antenna, Cable, Video 1, etc.)
st Menu) and press
th
Item).
st
Menu) and press
th Item).
st Menu) and press
th
Item)
st
Menu) and press
th
Item)
17
OPERATION
.
Operation