LG 60PX4DR Training Manual page 84

SOFTWARE UPDATES
If "COM1Port" is
connected it will display
the message under
Communication as:
Connection Port: COM1
Baud Rate: 115200
Now select the new configurations.
ROM Download: Batch file :
CORTEZ_2M.flm as shown in the figure.
Follow this same procedure with the
Ram and Flash files.
After locating the path of all the three
files (Batch, Ram and Flash), set the
unit up as shown.
Press Tilt Key from SVC Remocon and click on Download for successful download of software in TV.
After Successful downloading of the software in the TV:
Switch Off Main Power Supply to
the T.V Sets for more than 5
seconds and again Switch On the
Main Power Supply, TV is in
Standby mode(D.C Power Off).
Press Power Key from SVC
Remocon to turn the TV on.
Press ADJ Key from SVC Remocon
for Software Version Check.
42PM1M_UC_Ver3.06.......
42PM3MV_UC_Ver3.04
Now Press IN-STOP key on the
SCV Remocon to complete the Job.
Plasma Training
Clock here to locate the batch file
you want to load into the unit.
STATION
MF – 056A
Cortez Version 3.21
Hudson Version 3.19
Panel Used 2 Hr.
Tool Option 41
Area Option 20
Option1 106
Option2 23
Option3
Option4 128
System Control
Panel Control
Screen Control
Fan Control
BlkLine Detector
Power-off History
XSTUDIO Control
84
System Control
System
OverScan
OrbitPixel
Orbit Step
2
OrbitTime
Inv. Time
RS-232 Host
Baud Rate
STATION
4 - SYS
5 %
2
2
120 Sec.
30 Min.
Gprobe
115200 bps
Software Updates