Lifting and moving the Monitor
Please note the following advice to prevent the Monitor from being scratched or damaged and for safe transportation regardless of its type and size.
• It is recommended to move the Monitor in the box or packing material that the Monitor originally came in.
• Before moving or lifting the Monitor, disconnect the power cord and all cables.
• When holding the Monitor, the screen should face away from you to avoid damage.
• Hold the side and bottom of the Monitor frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
• When transporting a large Monitor, there should be at least 2 people.
• When transporting the Monitor, do not expose the Monitor to jolts or excessive vibration.
• When transporting the Monitor, keep the Monitor upright, never turn the Monitor on its side or tilt towards the left or right.
• Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.
• When handling the Monitor, be careful not to damage the protruding buttons.
• Avoid touching the screen at all times, as this may result in damage to the screen.
• When attaching the stand to the Monitor set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
Installing on a Table
• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from the wall to ensure sufficient ventilation.
• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
• Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
• If you need another power cord, please contact your local dealer or the nearest retail store.
6
Installation
100 mm
100 mm
100 mm
100 mm