Planet Networking & Communication GS-5220 Series User Manual page 57


Removing the Transceiver Module
1. Make sure there is no network activity anymore.
2. Remove the Fiber-Optic Cable gently.
3. Lift up the lever of the MGB module and turn it to a horizontal position.
4. Pull out the module gently through the lever.
Never pull out the module without lifting up the lever of the module and turning it to a horizontal
position. Directly pulling out the module could damage the module and the SFP/SFP+ module
slot of the Managed Switch.
User's Manual of GS-5220 LCD Series Managed Switch
Figure 2-2-5: How to Pull Out the SFP/SFP+ Transceiver
57