Planet Networking & Communication GS-5220 Series User Manual page 56

10Gbps SFP+ (10G Ethernet/10GBASE)
Model DDM
MTB-RJ -
MTB-SR YES
MTB-LR YES
MTB-TSR YES
MTB-TLR YES
10Gbps SFP+ (10GBASE-BX, Single Fiber Bi-directional SFP)
Model
DDM Speed (Mbps)
MTB-LA20
YES
MTB-LB20
MTB-LA40
YES
MTB-LB40
MTB-LA60
YES
MTB-LB60
It is recommended to use PLANET SFP/SFP+ on the Managed Switch. If you insert an SFP/SFP+
transceiver that is not supported, the Managed Switch will not recognize it.
1. Before we connect the GS-5220 LCD series to the other network device, we have to make sure both sides of the SFP
transceivers are with the same media type, for example: 1000BASE-SX to 1000BASE-SX, 1000BASE-LX to
1000BASE-LX.
2. Check whether the fiber-optic cable type matches with the SFP transceiver requirement.

To connect to 1000BASE-SX SFP transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.

To connect to 1000BASE-LX SFP transceiver, please use the single-mode fiber cable with one side being the male
duplex LC connector type.

Connecting the Fiber Cable
1. Insert the duplex LC connector into the SFP/SFP+ transceiver.
2. Connect the other end of the cable to a device with SFP/SFP+ transceiver installed.
3. Check the LNK/ACT LED of the SFP/SFP+ slot on the front of the Managed Switch. Ensure that the SFP/SFP+
transceiver is operating correctly.
4. Check the Link mode of the SFP/SFP+ port if the link fails. To function with some fiber-NICs or Media Converters, user
has to set the port Link mode to "10G Force", or "1000M Force".
Connector
Speed (Mbps)
Interface
10G Copper
10G LC
10G LC
10G LC
10G LC
Connector
Fiber Mode
Interface
10G WDM(LC) Single Mode
10G WDM(LC) Single Mode
10G WDM(LC) Single Mode
10G WDM(LC) Single Mode
10G WDM(LC) Single Mode
10G WDM(LC) Single Mode
User's Manual of GS-5220 LCD Series Managed Switch
Fiber Mode Distance
- 30m
Multi Mode Up to 300m
Single Mode 10km
Multi Mode Up to 300m
Single Mode 10km
Distance Wavelength (TX) Wavelength (RX) Operating Temp.
20km 1270nm
20km 1330nm
40km 1270nm
40km 1330nm
60km 1270nm
60km 1330nm
56
Wavelength (nm) Operating Temp.
0 ~ 70 ℃
-
0 ~ 60 ℃
850nm
0 ~ 60 ℃
1310nm
-40 ~ 75 ℃
850nm
-40 ~ 75 ℃
1310nm
0 ~ 60 ℃
1330nm
0 ~ 60 ℃
1270nm
0 ~ 60 ℃
1330nm
0 ~ 60 ℃
1270nm
0 ~ 60 ℃
1330nm
0 ~ 60 ℃
1270nm