6.3
Recommended nozzles
The burner complies with the emission requirements of the EN
267 standard.
In order to guarantee that emissions do not vary, recommended
and/or alternative nozzles specified by manufacturer in the In-
struction and warning booklet should be used.
It is advisable to replace nozzles every year dur-
ing regular maintenance operations.
WARNING
The use of nozzles other than those specified by
manufacturer and inadequate regular mainte-
nance may result into emission limits non-con-
forming to the values set forth by the regulations
in force, and in extremely serious cases, into po-
tential hazards to people and objects.
CAUTION
The manufacturing company shall not be liable for
any such damage arising from non-observance of
the requirements contained in this manual.
Start-up, calibration and operation of the burner
Recommended nozzles: Delavan
Alternative nozzles
Model
Nozzle
Steinen
BG6.1D
Danfoss
BG6.1D TL
Fluidics
Steinen
Danfoss
Fluidics
BG7.1D
Steinen
Danfoss
23
GB
Angle
Notes
60° H
60° H
60° HF
80° S
80° S
Up to 2.25 GPH
80° SF
60° Q
Up to 2.25 GPH
60° B
20137240