Table of Contents
Advertisement
Pull back on the operator control lever and hold it
against the handle.
The blade will continue to rotate for a few seconds after the engine has
stopped. Disconnect the spark plug cap if the lawnmower is to be left
unattended.
Take the starter rope with your right hand
and pull slowly as far as to have a
resistance, and then pull energetically on
the starter rope. (If the cold start is not
sufficient enough, repeat this operation 2
or 3 times)
Operation the controls for mowing
Blade is in action as soon as engine started.
While the machine is working maintain the security handle in working position. The engine will
stop as soon as you release the operator control lever.
Release the lever to stop the engine whenever you need to leave the mower.
Operator control lever
15
Advertisement
Table of Contents
