2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 7). Do
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
4
Charging the Battery
No Parts Required
Procedure
Model 20795 only
Refer to Charging the Battery in the Maintenance
section.
Figure 7
Product Overview
1. Upper handle
2. Control bar lock
3. Fuel tank cap
4. Side discharge
5. Air filter
6. Spark plug
7. Cutting height lever (4)
1. Grass bag
2. Side discharge chute
7
Figure 8
8. Washout port (not shown)
9. Oil fill/Dipstick
10. Recoil start handle
11. Battery (model 20795
only; not shown)
12. Ignition switch (model
20793 only) or electric
starter (model 20795 only)
13. Blade control bar
Figure 9
3. Battery charger (model
20795 only)
4. Rear discharge plug
(installed)