Figure 12
Adjusting the Handle Height
You may raise or lower the handle to a position
comfortable for you.
Rotate the handle lock, move the handle to one of three
positions, and lock the handle into position (Figure 13).
Figure 13
1. Handle lock
2. Handle positions
Starting the Engine (Model
20793 only)
Pull the recoil starter (Figure 14).
Note: If the mower does not start after several
attempts, contact an Authorized Service Dealer.
Starting the Engine (Model
20795 only)
Start the engine in one of 2 ways:
• Turn the ignition key to the Start position; when the
engine starts, release the key (Figure 15).
• Turn the ignition key to the Run position and pull the
recoil starter in the operating position (Figure 16).
9
Figure 14
Figure 15