Using The Self-Propel Drive - Toro Recycler 20795 Operator's Manual

Figure 16
Note: If the mower does not start after several
attempts, contact an Authorized Service Dealer.

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 17).
Note: You can self-propel the mower with the blade
engaged or disengaged.
Figure 17
Stopping the Engine (Model
20793 only)
Service Interval: Before each use or daily
Hold down the ignition switch (Figure 18) in the Stop
position until the engine stops.
1. Ignition switch
Important: When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.
Stopping the Engine (Model
20795 only)
1. Turn the key to the Off position (Figure 19).
2. Remove the ignition key when you leave the mower.
Important: When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.
10
Figure 18
Figure 19