Installing The Side Discharge Chute; Removing The Side Discharge Chute - Toro Recycler 20795 Operator's Manual

Figure 33
1. Lever
Note: To unlock the plug, rotate the lever on the plug
to the right (Figure 25).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
2. Tabs

Installing the Side Discharge Chute

1. Unlock the side discharge door (Figure 34).
2. Lift open the side discharge door (Figure 35).
3. Install the side discharge chute and close the door
onto the chute (Figure 36).

Removing the Side Discharge Chute

To remove the side discharge chute, reverse the steps
above.
Important: Lock the side discharge door after you
close it (Figure 37).
15
Figure 34
Figure 35
Figure 36
Figure 37