Quick Guide - Electrolux Talkie Service Manual

12 QUICK GUIDE

USER OPTIONS: Every dishwasher with an EDW2500 control unit is equipped with an "Options" button:
Press options button repeatedly until the desired function appears on the display.
The table below contains a brief description of the special functions available to the user:
Option or
Function
Buttons
Eco-drying
Extra rinse
Detergent
Rinse-aid
dispensing
Options
Water hardness
setting
Language
Buzzer
Brightness
Press OK/START button to confirm the selection.
If "Cancel" button is pressed repeatedly without confirming a choice, the system will exit the diagnostic mode and enter the cycle selection mode. When this occurs, no
programming parameter is changed.
If "Cancel" button is pressed for at least 6 seconds the default settings of language and brightness are reset.
(1) When button Options is pressed repeatedly, the selections available for the option under consideration appear in sequence.
NB: No "user" functions can be selected if a washing cycle has been selected (the unit must be in the pre-selection mode).
Method of selection
LCD Buttons
ECO-DRYING NO
(with flashing NO)
EXTRA RINSE NO
(with flashing NO)
Normal Detergent
(with flashing
NORMAL)
RINSE-AID YES
(with flashing YES)
Otpions
(1)
HARDNESS 40-50 °T
(with flashing 40-50 °T)
ENGLISH LANGUAGE
(with flashing
ENGLISH)
BUZZER VOLUME 1
(with flashing 1)
BRIGHTNESS 5
(with flashing 5)
Method of activation
LCD
When button Options is pressed again, NO begins flashing again and
ECO-DRYING YES
the symbol disappears
(with flashing SI and symbol
steadily lit)
When button Options is pressed again, NO begins flashing again and
EXTRA RINSE YES
the symbol disappears
(with flashing SI and symbol
steadily lit)
When button Options is pressed again, BIO begins flashing and the
DETERGENT 3IN1
relative symbol appears. When button Options is pressed again,
(with flashing 3IN1 and symbol
NORMALE begins flashing again and the symbol disappears
steadily lit)
When button Options is pressed again, SI begins flashing again
RINSE-AID NO
(with flashing NO)
When button Options is pressed again, the new hardness value
flashes.
HARDNESS 51-64 °T
N.B.: In some stylings the leveks 1, 2, 3, 4.. are displayed with the
(with flashing 51-64 °T)
message "WATER HARDNESS 1", ... instead of the hardness values
(40-50• for ex.)
When button Options is pressed again, the next available language
LANGUAGE ENGLISH flashes
(with flashing ENGLISH)
When button Options is pressed again, the new volume level flashes
BUZZER VOLUME 2
(with flashing 2)
When button Options is pressed again, the new brightness level
BRIGHTNESS 6 flashes
(with flashing 6)
39
Short description / Comment (See 4.3)