Manual Stitch Settings - Janome Continental M7 Professional Instruction Book

q
e
(−) (4.5) (+)
r
w
(−) (3.0) (+)

Manual Stitch Settings

You can alter the stitch width (or needle drop position of
the straight stitches) and stitch length.
Turn the stitch width or length adjusting dial, or press the
"+" or "–" key beside the setting you wish to change to
change the setting. Press default key e to recover the
original stitch setting.
When you press the adjust key q, the manual setting
window w expands to show more options.
You can alter other settings such as needle thread
tension and presser foot pressure value, depending on
the selected stitch pattern.
Press the close key r on the right upper corner of the
window to shrink the manual setting window.
q Adjust key
w Manual setting window
e Default key
r Close key
Altering needle drop position (straight stitches)
Turn the stitch width adjusting dial clockwise to move the
needle drop position to the right.
Turn the stitch width adjusting dial counterclockwise to
move the needle drop position to the left.
You can also change the setting with "+" or "–" key.
Press the "+" key to move the needle drop position to the
right.
Press the "–" key to move the needle drop position to the
left.
Altering stitch width
Turn the stitch width adjusting dial clockwise to increase
the stitch width.
Turn the stitch width adjusting dial counterclockwise to
decrease the stitch width.
You can also change the setting with "+" or "–" key.
Press the "+" key to increase the stitch width.
Press the "–" key to decrease the stitch width.
NOTE:
The adjustable range of patterns U6, U7, U9-U12 is 0.0
to 7.0.
46