Table of Contents
Advertisement
Quick Links
SERVICE MANUAL
STAINLESS STEEL PANEL TELEPHONE
EQUIPPED WITH ADI2.01 FIRMWARE
Communication Equipment
& Engineering Company
FOR
MODEL SSP-363-D
SSP-363-D-650-541-ADI2.01-ISSUE4.0
Serving the Telephone Industry Since 1930
1580 NW 65
Plantation, FL 33313
Voice: 954-587-5430
Fax: 954-587-5440
th
Avenue
Advertisement
Table of Contents
Troubleshooting
Related Manuals for CEECO SSP-363-D
Summary of Contents for CEECO SSP-363-D
- Page 1 SSP-363-D-650-541-ADI2.01-ISSUE4.0 SERVICE MANUAL MODEL SSP-363-D STAINLESS STEEL PANEL TELEPHONE EQUIPPED WITH ADI2.01 FIRMWARE Serving the Telephone Industry Since 1930 Communication Equipment 1580 NW 65 Avenue & Engineering Company Plantation, FL 33313 Voice: 954-587-5430 Fax: 954-587-5440...
- Page 2 ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL SSP-363-D EQUIPPED WITH ADI2.01 FIRMWARE SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
-
Page 3: Table Of Contents
TROUBLE SHOOTING CONTINUED… ............10 SPECIFICATIONS..................... 11 PARTS LIST ....................... 12 10.0 FCC NOTICE..................... 13 11.0 REPAIR AND RETURN INFORMATION ............. 14 12.0 WARRANTY POLICY ..................15 12.0 WARRANTY POLICY ..................15 13.0 DIAGRAM......................16 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 4: Introduction
ISSUE 4.0 INTRODUCTION The practices in this manual provide installation and maintenance information for the Model SSP-363-D Stainless Steel Panel Telephone, equipped with ADI2.01 software. For information not included in this manual, please call or write: CEECO Customer Service 1580 NW 65th Avenue... -
Page 5: Programming
Remove the stainless steel assembly from the mounting box, if purchased together. It will be necessary to use the security tool (sold separately as CEECO part number 301-037) to remove the security screws. Connect the telephone’s modular cord to a DTMF test set or a working telephone line. -
Page 6: Programming Continued
Programming is now completed. Hang up the phone and return the two plastic mini-jumpers to the “OFF” position as depicted on the last page of this manual. The phone is now ready for Testing/Operation. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 7: Testing/Operation
Security Tool 301-037 1/4" Nut Driver *The security tool is for a standard 5/32 5/16" Nut Driver button-head screw generally used on the Volt/Ohm Meter framework of telephone booth Flat Blade Screw Driver CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 8: Installation Notes And Assembly Instructions
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 9: Trouble Shooting Guide
PROBLEM: TRANSMITTER DOES NOT TURN ON POSSIBLE CAUSE: HANDSET MCRK-2 CARD NETWORK CABLE ASSY NETWORK PROBLEM: TRANSMITTER DOES NOT TURN ON FOR INCOMING CALLS POSSIBLE CAUSE: PHONE NOT PROGRAMMED TO ALLOW INCOMING CALLS. MCRK-2 CARD CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 10: Trouble Shooting Continued
PROBLEM: LOSES MEMORY CONTENTS AFTER EXTENDED PERIODS OF NO USE. POSSIBLE CAUSE: LITHIUM BATTERY PROBLEM: PHONE CANNOT BE PROGRAMMED POSSIBLE CAUSE: MEMORY CHIP MCRK-2 CARD KEYPAD KEYPAD CABLE ASSY. PROBLEM: RINGER DOES NOT OPERATE POSSIBLE CAUSE: RINGER NETWORK CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 11: Specifications
DIMENSIONS: 10.12" Wide x 13.12" High x 2.75" Deep MOUNTING: Vertical surface mount Lithium Battery – Long Life MEMORY RETENTION: FCC REGISTRATION: BW88T7-13823-TE-T UL LISTED NO.: 6OF5 RINGER EQUIVALENCE: 0.8A TYPE JACK: RJ11C CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 12: Parts List
Grommet 11020 Stainless steel panel 11025 Apparatus box 321-016 1/4"x20"x3/4" security screw 650-521 MCRK-2 Board 650-570 Network cable 705-110 Chrome keypad - alphanumeric 700-008 Keypad cable Accessories: 301-037 Security tool 705-113 Chrome keypad CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 13: Fcc Notice
FCC registration number and ringer equivalence number. These numbers are listed in section 9.00. The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 14: Repair And Return Information
Plantation, FL 33313 (954) 587-5430 11.3 NON-WARRANTY REPAIR: CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs both directions. 11.4 RETURN FOR CREDIT: Material may be returned for credit only with prior approval. Material authorized for return is subject to a 15% restocking charge based on the manufacturer’s list price. -
Page 15: Warranty Policy
CEECO will repair or replace any unit during this period if found to be defective for reasons other than abuse and improper use or improper installation. -
Page 16: Diagram
OVE THE MINI JUMPERS TO THE BEFORE POSITION GOING HOOK When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position, this will decrease battery life. CEECO Communication Equipment & Engineering Company PROPRIETARY...