Table of Contents
Advertisement
Quick Links
STAINLESS STEEL PANEL TELEPHONE
WITH 12 BUTTON AUTOMATIC DIALER
EQUIPPED WITH ADT1.03 FIRMWARE
Communication Equipment
& Engineering Company
SERVICE MANUAL
FOR
MODEL SSP-363-E
(FORMERLY SSP-365-E)
Sold by:
SSP-363-E-(SSP-365-E)-ADT1.03-ISSUE4.0
http://www.TWAcomm.com
Toll Free: (877) 892-2666
Serving the Telephone Industry Since 1930
th
1580 NW 65
Avenue
Plantation, FL 33313
Voice: 954-587-5430
Fax: 954-587-5440
Advertisement
Table of Contents
Related Manuals for CEECO SSP-363-E
Summary of Contents for CEECO SSP-363-E
- Page 1 SSP-363-E-(SSP-365-E)-ADT1.03-ISSUE4.0 SERVICE MANUAL MODEL SSP-363-E (FORMERLY SSP-365-E) STAINLESS STEEL PANEL TELEPHONE WITH 12 BUTTON AUTOMATIC DIALER EQUIPPED WITH ADT1.03 FIRMWARE Sold by: http://www.TWAcomm.com Toll Free: (877) 892-2666 Serving the Telephone Industry Since 1930 Communication Equipment 1580 NW 65 Avenue & Engineering Company...
-
Page 2: Important Information
ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL SSP-363-E EQUIPPED WITH ADT1.03 FIRMWARE SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support. -
Page 3: Table Of Contents
RECOMMENDED TOOLS AND TEST EQUIPMENT ........8 INSTALLATION INSTRUCTIONS ..............9 SPECIFICATIONS....................10 PARTS LIST ......................11 FCC NOTICE......................12 10.0 REPAIR AND RETURN INFORMATION............13 11.0 WARRANTY POLICY ..................14 12.0 DIAGRAM......................15 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 4: Introduction
ISSUE 4.0 INTRODUCTION The practices in this manual provide installation and maintenance information for the CEECO Model SSP-363-E (formerly SSP-365-E) Telephone, equipped with ADT1.03 firmware. The information in this manual is subject to change without notification. For information not included in this manual, please call or write:... -
Page 5: Programming
ISSUE 4.0 PROGRAMMING Using a security tool, CEECO part number 301-037, loosen and remove the security screws and separate the telephone assembly from the mounting or housing. Connect the Telephone to a working telephone line or a DTMF test set. -
Page 6: Sba Keypad Configuration
ISSUE 4.0 SBA KEYPAD CONFIGURATION… * Please note that some of the SBA keypads have the numbers 1-12 stamped on the keys, which directly correspond to the #01-#12 programming locations. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 7: Programming Continued
Narrow dial tone detect window. 436Hz to 336Hz Wide dial tone detect window. 590Hz to 250Hz (recommended) Digit 4: 0 10 PPS (enter 0 if Digit 1 was set for Tone Dial Mode.) 1 20 PPS CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 8: Programming Continued
RECOMMENDED TOOLS AND TEST EQUIPMENT Volt Meter 1/4" Nut Driver Flat Blade Screw Driver Security Tool 301-037 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 9: Installation Instructions
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 10: Specifications
APPROXIMATELY 8 LB. DIMENSIONS: 8 1/2" W x 11 1/2" H x 2 5/8" D MEMORY RETENTION: LITHIUM BATTERY - LONG LIFE FCC REGISTRATION: BW88T7-13823-TE-T UL LISTED NO. 6OF5 RINGER EQUIVALENCY: 0.8A TYPE JACK: RJ11C CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 11: Parts List
SBA Cable 700-008 Network 301-009 Network Cable 650-570 MCRK2 PC Board 650-521 Modular Jack 301-054 Security Screw 321-016 Rubber Grommet 301-052 Ringer 301-006 ACCESSORIES: Metal Button Keypad 705-110 Keypad Cable 700-008 Security Tool 301-037 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 12: Fcc Notice
FCC registration number and ringer equivalence number. These numbers are listed in section 7.0 The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 13: Repair And Return Information
Plantation, FL 33313 (954) 587-5430 10.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs for both directions. 10.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 15% restocking charge based on the manufacturer's list price. -
Page 14: Warranty Policy
Acts of God, or improper operation of equipment. CEECO will repair or replace any unit during this period if found to be defective for reasons other than abuse, neglect, Acts of God, improper use or improper installation. It is the buyer’s responsibility to return the defective unit to the factory. -
Page 15: Diagram
When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position; this will decrease battery life. CEECO Communication Equipment & Engineering Company Sold by: PROPRIETARY http://www.TWAcomm.com Toll Free: (877) 892-2666...
Need help?
Do you have a question about the SSP-363-E and is the answer not in the manual?
Questions and answers