Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CEECO SSP 361-D
Summary of Contents for CEECO SSP 361-D
- Page 1 Issue 4.0 MODEL SSP 361-D STAINLESS STEEL PANEL TELEPHONE Equipped with ATD11 Board SERVICE MANUAL COMMUNICATION EQUIPMENT AND ENGINEERING COMPANY 519 W South Park Street Okeechobee, FL 34972 863-357-0798 telephone Serving The Telephone Industry Since 1930. IMPORTANT INFORMATION...
- Page 2 Issue 4.0 CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL SSP-361-D EQUIPPED WITH ATD11 BOARD SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
-
Page 3: Table Of Contents
INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS ......... 6 TESTING..........................7 TROUBLESHOOTING ..................... 8 SPECIFICATIONS......................9 PARTS LIST ........................10 10.0 FCC NOTICE........................11 11.0 REPAIR AND RETURN INFORMATION ..............12 12.0 WARRANTY POLICY ....................13 CEECO Communication Equipment and Engineering Company PROPRIETARY... - Page 4 The practices in this manual provide installation and maintenance information for Model SSP-361-D Stainless Steel Panel Telephone. The information in this manual is subject to change without notification. For information not included in this manual, please call or write: CEECO Customer Service 519 W South Park Street Okeechobee, FL 34972...
-
Page 5: General Description
Issue 4.0 GENERAL DESCRIPTION The CEECO Model SSP-361-D is a Stainless Steel Panel Telephone designed for special purpose applications where a telephone must be both sturdy and attractive. It is equipped with an ATD-11A automatic tone dialer that will dial a single number of up to eleven (11) digits. The automatic dialing feature is activated when the handset is lifted (“off hook”... -
Page 6: Operation
Volt/Ohm Meter 1/4" Nut Driver Flat Blade Screw Driver Security Tool, CEECO Part Number 301-037 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS Using a 301-037 security tool (sold separately), remove the security screws. The security tool is for a standard 5/32" button head screw generally used on the framework of the phone booths. -
Page 7: Testing
(depending on the position of J2. Section 2.05), the programmed number is dialed, and then a normal phone conversation can take place. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 8: Troubleshooting
PROBLEM: TRANSMITTER DOES NOT TURN ON POSSIBLE CAUSE: HANDSET NETWORK PROBLEM: PHONE DOESN'T DIAL PROGRAMMED NUMBER POSSIBLE CAUSE: ATD-11A BOARD PROGRAMMING SWITCH MATRIX SET WRONG JUMPER IN WRONG POSITION PROBLEM: RINGER DOES NOT OPERATE POSSIBLE CAUSE: RINGER NETWORK CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 9: Specifications
Humidity 20%-90% FACEPLATE: Brushed 14 gauge Stainless Steel MOUNTING: Apparatus Box DIMENSIONS: 10.12” W x 13.12” H WEIGHT: 8 lb. FCC REGISTRATION: BW88T7-13716-TE-T UL LISTED NO.: 6OF5 RINGER EQUIVALENCY: 0.4A TYPE JACK: RJ11C CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 10: Parts List
301-009 Network 301-588 Hookswitch Cradle 301-581 Tongue and Bracket Assembly 301-570 Microswitch Assembly 301-018 Modular Cord 301-054 Modular Jack 361-001 Apparatus Box 406-019 Security Screw 10-32 x 1/2” ACCESSORIES: 301- 037 Security Tool CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 11: Fcc Notice
FCC registration number and ringer equivalence number. These numbers are listed in Section 7.0. The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment and Engineering Company PROPRIETARY... -
Page 12: Repair And Return Information
11.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs both directions. 11.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturers list price. -
Page 13: Warranty Policy
Printed circuit boards should not be repaired in the field. If a unit is found to be faulty, replace it with another unit and return the faulty unit to CEECO for repair. Modifications by anyone other than CEECO will void the warranty.
Need help?
Do you have a question about the SSP 361-D and is the answer not in the manual?
Questions and answers