Advertisement
Quick Links
STAINLESS STEEL ELEVATOR/
AUTOMATIC DIALING TELEPHONE
EQUIPPED WITH ADI2.01 FIMWARE
Communication Equipment
& Engineering Company
SERVICE MANUAL
FOR
MODEL SSP-373-D
SSP-373-D-ADI2.01-650-541-ISSUE4.0
Serving the Telephone Industry Since 1930
519 W South Park Street
Okeechobee, FL 34972
Voice: 863-357-0798
Fax: 863-357-0006
Advertisement
Related Manuals for CEECO SSP-373-D
Summary of Contents for CEECO SSP-373-D
- Page 1 SSP-373-D-ADI2.01-650-541-ISSUE4.0 SERVICE MANUAL MODEL SSP-373-D STAINLESS STEEL ELEVATOR/ AUTOMATIC DIALING TELEPHONE EQUIPPED WITH ADI2.01 FIMWARE Serving the Telephone Industry Since 1930 Communication Equipment 519 W South Park Street & Engineering Company Okeechobee, FL 34972 Voice: 863-357-0798 Fax: 863-357-0006...
-
Page 2: Important Information
ISSUE 4.0 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER MODEL SSP-373-D EQUIPPED WITH ADI2.01 FIRMWARE. SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support. -
Page 3: Table Of Contents
RECOMMENDED TOOLS AND TEST EQUIPMENT ........7 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS ..... 8 SPECIFICATIONS....................9 PARTS LIST ......................10 FCC NOTICE......................11 10.0 REPAIR AND RETURN INFORMATION............12 11.0 WARRANTY POLICY ..................13 12.0 DIAGRAM......................14 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 4: Introduction
863-357-0006- facsimile info@ceeco.net www.ceeco.net GENERAL DESCRIPTION The CEECO Model SSP-373-D Automatic Dialing Telephone is a microprocessor-based, typical elevator style telephone, housed in a rugged stainless steel case. The telephone is designed to provide typical elevator type service. When the handset is lifted one or two separate telephone numbers (depending on user programming) of up to twenty five digits may be automatically dialed. -
Page 5: Programming
Remove the stainless steel assembly from the mounting box, if purchased together. It will be necessary to use the security tool (sold separately as CEECO part number 301-037) to remove the security screws. Connect the telephone’s modular cord to a DTMF test set or a working telephone line. -
Page 6: Programming Continued
Programming is now completed. Hang up the phone and return the two plastic mini-jumpers to the “OFF” position as depicted on the last page of this manual. The phone is now ready for Testing/Operation. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 7: Testing/Operation
RECOMMENDED TOOLS AND TEST EQUIPMENT DTMF Test Set Volt/Ohm Meter 1/4" Nut Driver 5/16" Nut Driver Flat Blade Screw Driver Security Tool 301-037 CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 8: Installation Notes And Assembly Instructions
ISSUE 4.0 INSTALLATION NOTES AND ASSEMBLY INSTRUCTIONS The SSP-373-D is designed to be mounted inside any apparatus box with dimensions of 6 7/8∀W x 9 3/4∀H x 3∀D or greater. CEECO part number 371-011 is an apparatus box, which is well suited for this purpose. -
Page 9: Specifications
6 7/8∀W x 9 3/4∀H x 3∀D (handset on hook) MOUNTING: Vertical surface or enclosure mount WEIGHT: Approximately 4 lb. RINGER EQUIVALENCY: 0.8A FCC REGISTRATION NO.: BW-88T7-13717-TE-T UL LISTED NO.: 60F5 TYPE JACK: RJ11C CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 10: Parts List
Magnetic reed switch assembly 341-018 Modular cord 371-009A Mounting support bracket 650-541 MCRK-2 PCB Assembly OPTIONAL 371-011 Mounting box 371-012 Frame assembly for mounting box 406-019 10-32 x ½” Security screw (4 req’d) 301-037 Security tool CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 11: Fcc Notice
FCC registration number and ringer equivalence number. These numbers are listed in section 7.0 The FCC further requires that you notify your local telephone company when permanently disconnecting this telephone. CEECO Communication Equipment & Engineering Company PROPRIETARY... -
Page 12: Repair And Return Information
10.3 NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs both directions. 10.4 RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturer’s list price. -
Page 13: Warranty Policy
This warranty is limited to the value of material only. CEECO will repair or replace any unit during this period if found to be defective for reasons other than abuse and improper use or improper installation. -
Page 14: Diagram
ON position BEFORE going off-hook. When programming is completed, move the mini jumpers to the OFF position. NOTE: Do not leave the mini jumpers in the ON position; this will decrease battery life. CEECO Communication Equipment & Engineering Company PROPRIETARY...
Need help?
Do you have a question about the SSP-373-D and is the answer not in the manual?
Questions and answers