Fanimation BLITZ LP8377 Series Manual page 11

How to Wire Your Ceiling Fan (Continued)
L BLACK
WHITE
N
AC
POWER
3. Connect wires using connectors as shown in
Figure 4.
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
GRAY
YELLOW
RED
BLACK
BLUE
BLACK / WHITE
(or BROWN)
4. After connections have been made and put the white and green leads to one side and the black leads
towards the other side, the connection should be turned upward and carefully push leads into the outlet box.
The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side. (Figure 5)
The blades must be installed first before programming
is performed.
HANGER
BRACKET
HANGER
BALL
RECEIVER
WARNING
BLK-ANT
GREEN / YELLOW
- Ground wire (2)
From Receiver
Listed
Outlet Box
GREEN-Ground Wire
From Hanger Bracket
WHITE
GREEN-Ground Wire
From Hanger Ball
WARNING
BLUE
BLACK / WHITE (or BROWN)
GROUND
BLACK
ANTENNA
Figure 4
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
Green Wire
from Hanger
Bracket (Ground)
Green Wire
GREEN-
from Receiver (2)
Ground wire
(Ground)
From Ceiling
Green Wire
from Hanger
Ball (Ground)
Figure 5
11
RED
GRAY
YELLOW
BLACK / WHITE
(or WHITE)
RECEIVER HARDWARE USED:
Wire Connectors
Green Wire
from Supply
White Wire
(Ground)
from Supply
White Wire
from Receiver
Receiver
DC MOTOR
BLUE
LIGHT KIT
X 8
Listed
Outlet Box
Household
Supply
Black Wire
from Supply
Black Wire
from Receiver