Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ Server 4020A-8R. Instal-
lation and maintainance should be performed by experienced technicians only.
The 4020A-8R is a high-end 2U rackmount server based on the SC743S1-R760
4U/rackmount server chassis and the H8DA8 serverboard, which supports single
or dual AMD Opteron™ 200 series processors and up to 32 GB of ECC registered
DDR266 or 16 GB of ECC registered DDR400/333 SDRAM memory.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the H8DA8 serverboard and the
SC743S1-R760 chassis, which make up the 4020A-8R.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the 4020A-8R into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface
Advertisement
Table of Contents
