Table of Contents
Advertisement
AS1020P-T(R)/1020P-8(R) User's Manual
CPU0: CPU1 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2
bit, 4 bit, 8 bit and 16 bit.
CPU0: HT2000 HT Link Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or
equal to the system clock and if the board is capable. Options are Auto, 200
MHz, 400 MHz, 600 MHz, 800 MHz and 1 GHz.
CPU0: HT2000 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2
bit, 4 bit, 8 bit and 16 bit.
HT2000: HT1000 HT Link Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or
equal to the system clock and if the board is capable. Options are Auto, 200
MHz, 400 MHz, 600 MHz and 800 MHz.
HT2000: HT1000 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2
bit, 4 bit and 8 bit.
MPS Confi guration
MPS Revision
This setting allows the user to select the MPS revision level. The options are
1.1 and 1.4.
PCI Express Confi guration
Active State Power Management
This setting is used the Enable or Disable the PCI Express L0s and L1 Link
power states.
AMD PowerNow Confi guration
AMD PowerNow
This setting allows the user to Enable or Disable the AMD PowerNow feature.
7-8
Advertisement
Table of Contents
