Wiring - Boss Audio Systems ELITE HARLEY-DAVIDSON BEHDX98 User Manual

Wiring

See the section "Installation Precautions".
Disconnect the negative terminal of the
vehicle battery prior to wiring.
Always run signal wires away from power
cables to reduce the possibility of noise.
23-Pin Male Connector
Connect to the 23-pin
Harley-Davidson factory
®
wiring harness.
Power Connection (Plug and Play)
To power the unit, simply connect your Harley-
Davidson factory harness to the unit.
®
Other Connections
1
: Connect to a USB flash drive for music playback;
or charge a mobile phone (1.5A).
2
: Bluetooth antenna for better reception.
Never cut, short or ground this wire.
3
: Connect to a FM/AM radio antenna (not
included) for radio reception.
4
: Connect to a mobile phone or MP3 player for
music playback.
5
: Connect to a SiriusXM-Connect Vehicle Tuner
(not included) for SXM radio reception.
6 7
/ : Connect to external lighting for power
supply (350mA max load).
35-Pin Male Connector
Connect to the 35-pin
Harley-Davidson factory
®
wiring harness.
- 5 -
USB/Charging Port
BT Antenna
Blue/White
Radio Antenna
AUX-IN
SIRIUSXM INPUT
DC12V- 2
Brown/White
DC12V- 1
Brown
Power Antenna/Amplifier Remote
Blue
SUB-W Out
Black
Front Line Out
Black
Rear Line Out
Gray
8
: Connect to an external device/amplifier (not
included) for power control.
9
: Connect to the subwoofer input on an external
amplifier for sound output.
10
: Connect to the front audio input on an external
amplifier for sound output.
11
: Connect to the rear audio input on an external
amplifier for sound output.
1
(Never cut)
2
3
4
5
6
7
8
Green
9
White (L)
10
Red (R)
White (L)
11
Red (R)