Wiring - Boss Audio Systems elite BEHDIN98 User Manual

Wiring

See the section "Installation Precautions".
Disconnect the negative terminal of the
vehicle battery prior to wiring.
Always run signal wires away from power
cables to reduce the possibility of noise.
23-Pin Male Connector
Connect to the 23-pin
Harley-Davidson factory
®
wiring harness.
Power Connection (Plug and Play)
To power the unit, simply connect your Harley-Davidson
Other Connections
1
: Connect to a USB flash drive for music playback; or charge a mobile phone (1.5A).
2
: Bluetooth antenna for better reception. Never cut, short or ground this wire.
3
: Connect to a FM/AM radio antenna (not included) for better reception.
4
: Connect to a mobile phone or MP3 player for music playback.
5
: Connect to an external amplifier (not included) for power supply control.
6
: Connect to the front audio input on an external amplifier (not included).
35-Pin Male Connector
Connect to the 35-pin
Harley-Davidson factory
®
wiring harness.
- 5 -
BT Antenna
Blue/White
Radio Antenna
AUX-IN (3.5mm)
Power Antenna/Amplifier Antenna
Blue
Front Line Out
factory harness to the unit.
®
USB Port
(Never cut)
White (L)
Red (R)
1
2
3
4
5
6