Siriusxm Radio - Boss Audio Systems ELITE HARLEY-DAVIDSON BEHDX98 User Manual

Harley-davidson direct fiti 288 watts bluetooth mp3/wma am/fm receiver
Table of Contents

Advertisement

Radio Settings
You can access the radio menu to change settings for your radio.
1.
In radio source, press
2.
Rotate the function knob to select an option, then press the function knob to confirm the selection.
• [LOCAL]: Select [ON] when most FM stations are strong enough (e.g. in urban areas). Only the stations
with strong signal will be received.
Select [OFF] when most FM stations are weak (e.g. in the countrysides). Stations with both strong and weak
signals will be received.
• [AUTO STORE]: Press the function knob to search and store FM or AM radio stations.
• [TUNER REGION]: Select a country or region you are in to receive radio signal.
• [RDBS]: Enable or disable RDBS. When enabled, the unit will receive and display RDBS information (i.e.
station name, program type or other dynamic/static message) carried by FM radio signals. Not all FM radio
stations will have or display RDBS information.
3.
Press
/
to exit the settings.

SiriusXM Radio

SiriusXM is where moments happen. It brings you ultimate entertainment.
• The widest, deepest variety of music, ad-free.
• More games, more sports, more coverage than anywhere.
• The most extensive entertainment, complete news coverage and every kind of comedy.
• Listen in your car, on your phone, online and at home.
A SiriusXM-Connect Vehicle Tuner and subscription are required. For more information, visit www.siriusxm.com.
Preparation
Step 1: Connect a SiriusXM-Connect Vehicle Tuner (not included) to the SIRIUSXM INPUT (SiriusXM-
Ready
) connector on the back of this unit.
®
• After installing your SiriusXM-Connect Vehicle Tuner and antenna, power on the head unit and select
SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1.
• If you cannot hear the preview channel, please check the installation instructions to make sure your
SiriusXM-Connect Tuner is properly installed.
Step 2: Check your Radio ID for activation.
• The SiriusXM Radio ID is required for activation and can be found by tuning to Channel 0 as well as by
looking on the label found on the SiriusXM Vehicle Tuner and its packaging.
• The Radio ID does not include the letters I, O, S or F.
to display radio settings menu.
(P.5)
- 9 -

Advertisement

Table of Contents
loading

Table of Contents