Summary of Contents for Lean Cars BMW S1000 RR RIDE-ON
Page 1
BMW S1000 RR RIDE-ON Owner’s Manual with Assembly Instructions Styles and colo(u)rs may vary. Made in China. The owner’s manual contains important safety information as well as assembly, use and maintenance instructions. The Ride-on Car must be assembled by an adult who has read and understands the instructions in this manual.
Page 2
About Your New Ride-On │ 1 On the purchase of your new Ride-On. This ride-on car will provide your child with many miles of riding of enjoyment. To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference.
Parts List │ 2 PART Q’ty (pcs) PART NAME REMARKS Vehicle body One pair View mirror Spanner Charger Ø4x12 screw Bolt *Side wheel Ø10 locknut Tail light Rear licence plate NOTE: Some parts shown are assembled on both sides of vehicle...
Before Assembly │ 3 WARNING! • CHOKING HAZARD - Small parts. Not suitable for children under 36 months. The product contains small parts, keep children away when assembling. • ADULT ASSEMBLY REQUIRED. • Always remove protective material and poly bags and dispose before assembly. •...
Page 5
Attach the Side Wheels │ 4 HINT: The kickstand was factory assembled already. If you want to use side wheel, Remove the kickstand please. Kickstand 1. Fit the side wheel to the vehicle body from the left side. 2. Insert the bolt into the hole in the side wheel support, and through the vehicle body.
Page 6
Attach the View Mirror │ 5 1. Fit the View mirror to the facuguard, 2. Tighten a screw to secure it with a screwdriver. 3. Repeat for the other side. Refer to the battery information on page 4. If you your vehicle with the sound function, follow the 4~7 steps to add the batteries(not included) 4.
Connect the Power Supply │ 6 Lock Fuse box 1&2. Turn the Lock on the top of seat and remove the seat. 3. Plug the Red fuse connector into the terminal on battery.
Page 8
Attach the Tail light & Rear Licence Plate │ 7 1. Fit the tail light to the vehicle body, 2. Tighten three Ø4x12 screws to secure it with a screwdriver. 3. Fit the rear licence plate to the vehicle body, 4.
Safety │ 8 WARNING! PREVENT INJURIES AND DEATHS: • NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION IS REQUIRED. Always keep child in view when child is in vehicle. • This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
Page 10
Use Your Ride-on │ 9 1. Power Switch: Turns the vehicle on and off. 2. High/Low speed switch: The switch operates the vehicle to move in low or high speed. 3. Sounds buttons(if equipped): Press for sounds playing. 4. Foot pedal: Applies power (speed) to the vehicle. ADVANCED USE - High speed Drive Make sure your child knows how to steer, how to start and stop the vehicle and knows the rules for safe driving.
Page 11
Charging │ 10 ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY! WARNING! • PREVENT FIRE AND ELECTRIC SHOCK: - Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery or the charger with another brand. Using another battery or charger may cause a fire or explosion. - Do not use the battery or charger for any other product.
Page 12
Charging │ 11 1. Plug the charger port into the input socket. (the socket is above the foot pedal) 2. Plug the charger plug into a wall outlet. The battery will begin charging. WARNING! This product with Charging Protection: when charging, all functions will be cut off! Only an adult can charge and recharge the battery!
Battery Replacement & Fuse │ 12 The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for 20 seconds and then turned ON again.
Troubleshooting Guide │ 13 Possible Cause Solution Problem Vehicle does not run Battery low on power Recharge battery. Thermal fuse has tripped Reset fuse, see <Fuse> Check that the battery connectors are firmly plugged Battery connector or wires into each other. If wires are loose around the motor are loose contact your distributor please.
Page 15
Maintaining │ 14 • It is parents' responsibility to check main parts of the toy before using, Must regularly examine for potential hazard, such as the battery, charge,cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be used until that damage had been properly removed.
Page 16
Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.
Need help?
Do you have a question about the BMW S1000 RR RIDE-ON and is the answer not in the manual?
Questions and answers