Advertisement
Quick Links
CH9939
Baby Ride On Car
Install & Operation Manual
●
Simulation F1 car styling
●
Pedal forward, backward function
Assembly By Adult Only
Please follow real product, Photo for reference only
The picture in this manual is to show the product operation and structure, please
follow the real product only if any difference between picture and product happens.
There must be chance not to inform you on time to improve the product result from
appearance or structure, please be understood.
Please read this manual carefully before play the product, it tells you the
right way for operation and install to avoid any possible hurt to your kids.
Please keep this manual and put it in a place where is easy to get.
Specification
Specification
Item
Batteries and fuse
Oouble drisve(12V7A,12V10A)Reversible fuse
Double drive 12V 35W(drive)
Motor
Age
3-8 years
Max Weight
35KG
1260*593*603mm
Dimension
Speed
high speed 5km/h low speed2.5km/h
Play Time
1-2 hours / recharger time 8-12hours
Charger
Out Put DC 12V
All the data above is for customer selection,
please follow the real product finally.
Advertisement
Related Manuals for Lean Cars CH9939
Summary of Contents for Lean Cars CH9939
- Page 1 CH9939 The picture in this manual is to show the product operation and structure, please follow the real product only if any difference between picture and product happens. Baby Ride On Car There must be chance not to inform you on time to improve the product result from appearance or structure, please be understood.
- Page 2 Install & Operation Part name CH9939 Baby Ride On Car Install & Operation Manual ● Simulation F1 car styling ● Pedal forward, backward function ● Executive standard: EN71 and EN62115 ; GB6675-2003 and GB19865-2005 Assembly By Adult Only Please follow real product, Photo for reference only 1.
- Page 3 Install & Operation Install & Operation 3. Install steer wheel cell battery 5. Install the rear defend as arrow, Tight it by 4pcs M4*12 UmbrellA screw. Put in 3*AAA cell battery (Customer buy themself) into steer wheel, and put on the battery cover, then install the steer wheel as PIC finally tight by rod, nut Connect the wire as show.
- Page 4 Instruction for use Power Follow/back swicht High and low foot switch speed switch 1. power switch function: start the whole car power supply. 2. foot switch function: start the whole vehicle movement state. 3. forward, backward switch function: control the vehicle forward, back. 4.
- Page 5 Warning_________________________________________ Failures and Solutions Please do pay attention to following notices for the purpose of your baby’s safe driving experience: Failures Possible Reasons Solutions The motorcycle must be installed and adjusted by adults and make sure your kids are kept from the moving components of the motorcycle.
- Page 6 Consideration for Application of the Motorcycle____________________ Make sure the accumulator has been charged for 18 hours for the first time of application, or the accumulator will be impaired permanently and such impairment cannot be recovered. Make sure all the components have been well mounted and tightly connected before using the motorcycle.
Need help?
Do you have a question about the CH9939 and is the answer not in the manual?
Questions and answers