Installation Instructions
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Screw 4 feet in.
– To level the appliance, you may adjust the height of feet.
IMPORTANT!
Never use the appliance without feet.
•
Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•
Leave at least 10 cm clearance from flammable walls and items.
5.2
Electrical Connection
•
Verify if the technical specification of the appliance (see the rating plate)
corresponds to the characteristics of the local electric mains grid.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
A circuit breaker of sufficient capacity to disconnect all poles from the power
supply must be installed upstream of the appliance, in an easily accessible
place; its contact opening width must ensure complete separation according to
overvoltage category III, in accordance with the installation regulations. The
maximum permissible leakage current of the appliance is 1 mA/kW.
•
Flexible, oil-resistant rubber hoses type H05RN-F or H07RN-F must be used for
connection. Cord cross-section is stated in the technical data table.
•
Connect the power cord to the terminal block according to the wiring diagram
supplied with the unit.
•
Secure the part of the power cord outside the appliance with a metal tube or
rigid plastic hose.
•
In the event of damage to the power cord, have it repaired by the manufacturer,
service company or a professional to exclude any risk.
•
Connect the electrical appliance to a working earthing.
•
Connect the protective conductor to the terminal marked with the earth symbol
next to the input terminal block.
•
Connect the metal structure of the electrical appliance to a protective
equipotential bonding device.
284422
EN
17 / 22