Static Multicast Group Template; Figure 43 Template: Multicast Template; Table 34 Template: Multicast - ZyXEL Communications Version 1.03 User Manual

Chapter 6 Template

6.4 Static Multicast Group Template

Use the static multicast filter to allow incoming frames based on multicast MAC address(es)
that you specify. This feature can be used in conjunction with IGMP snooping to allow
multicast MAC address(es) that are not learned by IGMP snooping. Use the static multicast
filter to pass routing protocols, such as RIP and OSPF.
Click Template > Multicast Template to display the screen as shown.

Figure 43 Template: Multicast Template

The following table describes the labels in this screen.

Table 34 Template: Multicast

LABEL
Device Type
Template
No.
Multicast Name
New
Modify
Delete
Port List
Port
Immed. Leave
82
DESCRIPTION
Select a device from the drop-down list box to view the device's VLAN configuration.
This field displays the index number.
This field displays the descriptive name for the multicast template.
Click New to create a new multicast template.
Click Modify to change the settings of the selected multicast template.
Click Delete to remove the selected multicast template.
This field displays the port number.
This field displays True when the switch is set to remove this port from the multicast
tree when an IGMP version 2 leave message is received on this port.
This field displays False when the feature is disabled.
NetAtlas Workgroup User's Guide