Dscp Setting; Figure 149 Ip Configuration: Diffserv; Table 108 Diffserv: Dscp Setting; Table 109 Default Dscp-Ieee802.1P Mapping - ZyXEL Communications Version 1.03 User Manual

Chapter 19 IP Configuration
The following table describes the labels in this screen.

Table 108 DiffServ: DSCP Setting

LABEL
Active
Apply

19.3 DSCP Setting

You can configure the DSCP to IEEE802.1p mapping to allow the switch to prioritize all
traffic based on the incoming DSCP value according to the DiffServ to IEEE802.1p mapping
table.
The following table shows the default DSCP-to-IEEE802.1P mapping.

Table 109 Default DSCP-IEEE802.1p Mapping

DSCP
VALUE
IEEE802.1P
Configure DSCP mappings in the DSCP Setting screen.

Figure 149 IP Configuration: DiffServ

202
DESCRIPTION
Select Active to enable DiffServ on the port.
Click Apply to save the changes.
0 – 7 8 – 15
0 1
16 – 23 24 – 31 32 – 39
2 3 4
NetAtlas Workgroup User's Guide
40 – 47 48 – 55 56 – 63
5 6 7