Table of Contents
Advertisement
AMM-1022
5.3 Battery replacement
To replace the battery (see the Figure):
- When the battery voltage drop below proper operation
range the
the battery need to be replaced.
- Turn the meter off and remove all test leads.
- Use a screwdriver to unscrew the two screws secured on
the battery cover, and remove the battery cover.
- Replace the battery with three new 1.5V battery (AAA).
- Reinstall the battery cover and secure by the two screws.
Before replacing the battery, disconnect test
leads from any circuit under test, turn the
meter off and remove test leads from the
input terminals.
ACCESSORIES
⑴ Test Leads
⑵ Battery:1.5V, AAA
⑶ Instruction Manual
⑷ Thermocouple (K type)
symbol will appear on the LCD display and
one set
three pieces
one piece
one piece
17
Advertisement
Table of Contents
