Bardiani Valvole BBWMF1 Instruction, Use And Maintenance Manual page 9

2 General safety warnings
2 General safety warnings
2.1 General safety warnings
Intended use
Bardiani valves have been designed exclusively for moving 昀氀uids.
Prohibited use
The valve must not be used:
• for any operations different to those described under the heading "Intended Use",
• for handling 昀氀uids different to the type speci昀椀ed by the manufacturer;
• for moving 昀氀uids at different pressures to those envisaged by the manufacturer and indicated in the
valve's technical data.
Limitations on valve use
It is forbidden to:
• use the valve in a construction con昀椀guration different to the one envisaged by the manufacturer.
• use the valve where there is a risk of explosion and/or 昀椀re, unless envisaged by the manufacturer (if
the valves are certi昀椀ed in accordance with Directive 2014/34/EU, please refer to the ATEX Manual)-;
• integrate other systems and/or equipment which were not considered by the manufacturer during the
executive design phase,
• use the valve for purposes other than those speci昀椀cally envisaged by the manufacturer.
WARNING!
The valve may not he used inside premises where there is a potentially explosive atmosphere or risk
of 昀椀re unless otherwise stated by the manufacturer (in the case of valves certi昀椀ed in accordance with
Directive 2014/34/EU please refer to the ATEX Manual).
BARDIANI VALVOLE S.p.A. declines all liability for installation,
use or maintenance which fails to comply with the indications
provided in this manual!
EN-IST-BBZM-0123
9