Table of Contents
Advertisement
4
Checking / Unpacking / Lifting
4 Checking / Unpacking / Lifting
1. CHECK:
- Check the valve show no signs of damage caused during transport
and that it corresponds with the order;
- Check the inside of the valve.
2. UNPACKING
The valve packaging is made up of cardboard, wood and plastic.
The valve is mainly made up of metal materials. The gaskets are
usually made from elastomers. The handle in the DN15 - DN100
sizes is made from plastic (POM-C). Disposal must be in compliance
with local legislation.
3. VALVE LIFTING:
Take care as to the type of valve you are handling.
CAUTION!
Before lifting the valve, make sure there are no disassembled or
separate valve parts which could fall off causing injury to persons
and damage to the valve.
DN10 and DN150
Weight up to 25 kg
CAUTION!
The 昀椀gures above are used purely to represent the methods and procedures for hoisting the valves.
Bardiani Valvole S.p.A. declines all liability for any damage to things and/or injuries to persons caused by
improper and/or incorrect hoisting of the valve.
EN-IST-BBZM-0123
11
Advertisement
Table of Contents
