Table of Contents
Advertisement
Lubrication
Greasing the Machine
Service Interval: Every 50 hours
When operating the machine under normal conditions,
lubricate all grease fittings for the bearings and
bushings with No. 2 lithium grease. Lubricate the
bearings and bushings immediately after every
washing, regardless of the interval listed. Apply a light
coating of oil onto the control cables.
Figure 21
Cylinder pivots (2)
Figure 22
Hydraulic slew motor (3)
Engine Maintenance
Servicing the Air Cleaner
Service Interval: Every 25 hours—Service or replace
Every 100 hours—Replace the air-cleaner
paper element (more often under extremely
dusty, dirty conditions).
Note:
Operating the engine with loose or damaged
air-cleaner components could allow unfiltered air into
the engine, causing premature wear and failure.
Note:
Service the air cleaner more often under
extremely dusty, dirty conditions.
Removing the Elements
1.
Rotate the latches outward.
2.
Remove the cover to access the air-cleaner
elements
g019608
1. Air-cleaner cover
3.
Remove the foam and paper elements
24).
4.
Remove the foam element from the paper
element
(Figure
g322675
21
the air-cleaner foam element (more
often under extremely dusty, dirty
conditions).
(Figure
23).
Figure 23
2. Air-cleaner latch
24).
g243624
(Figure
Advertisement
Table of Contents
