JVC AA-VF7E Instructions Manual page 3

CAUTION:
To avoid electric shock or
damage to the unit, first firmly
insert the small end of the
power cord into the battery
charger until it is no longer
wobbly, and then plug the
larger end of the power cord
into an AC outlet.
CAUTIONS:
● If used near a radio, this unit may interfere with reception.
● Prevent inflammables, water and metallic objects from
entering the unit.
● Do not disassemble or modify the unit.
● Do not apply shocks to the unit.
● Do not subject the unit to direct sunlight.
● Avoid using the unit in extremely hot or humid places.
● Avoid using the unit in places subject to vibrations.
A WORD ON THE EXCLUSIVE BATTERY PACKS
The battery packs are lithium-ion.
Give attention to the following to make the most of their
characteristics.
For charging : 10°C to 35°C
For operating : 0°C to 40°C
For storing : –10°C to 30°C
This battery charger is for use exclusively with JVC
Digital Video Camera.
This battery charger is in conformity with the provisions
and protection requirements of the corresponding
European Directives.
This equipment is designed exclusively for JVC digital
video cameras and battery packs.
IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in your
home or the cable is too short to reach a power point, then
obtain an appropriate safety approved extension lead or
consult your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted, and to replace the
fuse cover.
If nonetheless the mains plug is cut off be sure to remove the
fuse and dispose of the plug immediately, to avoid possible
shock hazard by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then
follow the instructions given below:
DO NOT make any connection to the Larger Terminal coded
E or Green.
The wires in the mains lead are coloured in accordance with
the following code:
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consult a competent electrician.
Blue to N (Neutral) or Black
Brown to L (Live) or Red
3
EN