Pro-Form PFTL05099.0 User Manual page 9

5. With the help of a second person, carefully tip
the treadmill onto its right side. Have a second
person hold the treadmill to prevent it from
tipping. Do not pivot the Frame (45).
Attach a Wheel (66) to the Base (62) with a 3/8"
x 1 1/2" Bolt (4) and a 3/8" Jam Nut (8) from the
direction shown. Do not overtighten the Jam
Nut; the Wheel must turn freely.
6. Set the Left Upright Spacer (65) on the Base
(62). Orient the Left Upright (64) so that the
bracket is in the position shown.
Hold a Bolt Spacer (71) inside the lower end of
the Left Upright (64). Insert a 3/8" x 4" Bolt (1)
with a 3/8" Star Washer (9) into the Left Upright
and the Bolt Spacer. Repeat this step with a
second Bolt Spacer (71), 3/8" x 4" Bolt (1),
and 3/8" Star Washer (9).
Hold the Left Upright (64) against the Left
Upright Spacer (65). Partially tighten a 3/8" Jam
Nut (8) with a 3/8" Star Washer (9) onto each
3/8" x 4" Bolt (1); do not fully tighten the Jam
Nuts yet.
With the help of a second person, tip the
treadmill so that the Base (62) is flat on the
floor.
5
66
4
6
1
9
71
9
9
Get other manuals https://www.bkmanuals.com
8
62
64
65
62
8
45
Bracket