Table of Contents
Advertisement
Removing the defective light bulb
Inserting a new bulb and cover cap in the wheel
arch
›
Insert the plug into the new bulb until it clicks into
place.
›
Insert the new bulb into the headlight so that the
guide lugs on the bulb are aligned with the corre-
sponding openings in the headlight.
›
Turn the bulb clockwise
›
Replace the rubber protective cap on the headlight.
›
Insert the cover in the wheel arch and lock into
place.
Lighting, windscreen wipers and washers ›
›
Insert the bracket from
the tool kit into the re-
cess in the cover cap.
›
Remove the cover by
pulling on the bracket.
›
Remove the rubber
protective cap from
the headlight.
›
Turn the bulb and re-
move it.
›
Release the connector
and remove it from the
bulb.
to secure.
Rear turn signal
Loosen and remove the light
Replacing the light bulb
Replace light bulbs
53
›
Loosen and remove the
grid in the area
.
A
›
Unscrew the screw.
›
Remove the light.
›
Slightly pull out the
lock
at the plug.
A
›
Press the safety button
and remove the plug.
›
Turn and remove the
socket with the bulb.
Advertisement
Table of Contents
