Table of Contents
Advertisement
90 Infotainment Bolero ›
Restriction
NOTICE
The availability of some media operation functions is
dependent on the connected source and the soft-
ware being used, e.g. Bluetooth®.
Settings
Turn title playback including subfolders on/off
›
In the Media main menu, tap on
subfolders.
Traffic
›
To turn on/off the traffic monitoring during the
playback of media files, go to the Media main menu
and tap on
Traffic programme (TP).
Safely disconnect the connected device
NOTICE
Risk of damage to the data on the connected device!
To safely disconnect/remove the device, proceed as
follows.
›
In the Media main menu, tap
›
Select the desired device.
›
Disconnect/remove the device.
Bluetooth® player
Infotainment allows audio files of a connected Blue-
tooth® player to play using the A2DP and AVRCP au-
dio profile.
With Infotainment, multiple devices can be paired
using Bluetooth®, but only one of them can be used
as a Bluetooth® player.
›
For connecting the Bluetooth® player, pair and
connect the device via Bluetooth®.
›
In the Media main menu , tap on
devices.
›
In the list, choose the device with the symbol .
If a device is connected to Infotainment using
Apple CarPlay or Android Auto, then it cannot be
connected using Bluetooth®.
SD card
NOTICE
Risk of damaging the SD card reader!
Do not use SD cards with a broken slide for write
▶
protection.
Supported sources and files
Media
Mix/Repeat including
Safely remove:.
Bluetooth paired
›
To insert the SD card, with the bevelled corner to
the right, push into the slot in the external module
until it snaps into place.
›
To remove, first disconnect the SD card safely. To
do this in the Media main menu, tap
and select the SD card.
›
Press on the inserted SD memory card.
The SD card moves to the eject position.
NOTICE
When using an SD card with an adapter, vehicle vi-
brations might cause the card to fall out of the
adapter.
USB device
›
To connect, insert the USB device into the appro-
priate port.
To play audio files, use USB ports that support data
transfer.
›
To disconnect disconnect the USB device first. To
do this in the Media main menu, tap
ly:and select the USB device.
›
Disconnect the USB device.
A USB device can be connected directly to the
USB port or via a connection cable.
We recommend that you use extension cables from
ŠKODA Original Accessories.
USB extension cables or reducers may affect the
playback function of the connected device.
Load USB audio source
After connecting the USB device, charging will start
automatically when the following conditions are met.
✓ The ignition is switched on.
✓ The USB device allows charging.
The charging efficiency can be different compared to
the charging from the usual mains power supply.
Depending on the type of the connected USB device
and the frequency of use, the charging current may
not be sufficient to charge the battery of the con-
nected device.
Some connected audio sources may not be recog-
nised and cannot be charged.
Remove safely:
Remove safe-
Advertisement
Table of Contents
