Related Manuals for VAUPEL 2000 MS
Summary of Contents for VAUPEL 2000 MS
- Page 1 OPERATING MANUAL 2000 MS V7.4/20-EN Spray gun 2000 MS Art. no.: 20101, 20110 Page| 1...
-
Page 2: Table Of Contents
OPERATING MANUAL 2000 MS V7.4/20-EN Thank you very much for the trust you have placed in us and our products. Please read the operating manual first before working with the spray gun. This operating and maintenance manual contains important information required for the safe and trouble-free operation of your spray gun. -
Page 3: Technical Data
1 litre cans. 4. Features The effectiveness of the 2000 MS spray gun is based on the Venturi effect. For this purpose, an air stream is used which accelerates when the air nozzle flows through and thus generates negative pressure in the adjoining riser pipe. -
Page 4: Installation
OPERATING MANUAL 2000 MS V7.4/20-EN • It is essential to disconnect the spray gun from the compressed air connection. • Only use original spare parts. • The maximum working pressure must not be exceeded (see point 1 "Technical data"). The working pressure must be ad- justed via a (filter) pressure reducer. -
Page 5: Storage
OPERATING MANUAL 2000 MS V7.4/20-EN Attention: Disconnect the device from the compressed air source before starting maintenance and care. 8. Storage The compressed air tool must be stored under the following conditions: • If residual material is present, store only upright! •... -
Page 6: 11. Address
OPERATING MANUAL 2000 MS V7.4/20-EN If warranty claims are made, the spray gun must be in its original condition. 11. Address In case of service your sales representative is at your side or contact the fol- lowing address: Vaupel GmbH Gerätebau &... -
Page 7: 12. Ec-Declaration Of Conformity
OPERATING MANUAL 2000 MS V7.4/20-EN 12. EC-declaration of conformity EC-declaration of conformity In accordance with the EC Machine Directive 2006/42/EC, Type of gun: Suction gun for compressed air Type designation: Type 2000 MS Type description: Spray gun Article number manufacturer: 20101, 20110... -
Page 8: 13. Technical Drawing And Spare Parts List
OPERATING MANUAL 2000 MS V7.4/20-EN 13. Technical drawing and spare parts list Pos. Article no. Description Gun body 50 3909 005 Trigger 30 1102 006 Lever axis 60 3100 029 Lock washer Valve bolt 80158 O-ring 1,5 x 0,75 mm...